Meraki

rwiesmann · ‎Dec 5 2024

Very well done. Especially @Jamieinbox and @JosRus. Congratulation to all of you!

rwiesmann · ‎Dec 4 2024

I would try to exclude as many points as possible Change the switchport If possible on a switch port on an other switch With that you can exclude the switch Then change cables With that you can exclude the cables If then the problem still exists, i would open a support case with cisco.

rwiesmann · ‎Dec 2 2024

Congratulation to all the winners, well done!

rwiesmann · ‎Nov 26 2024

well done, keep going

rwiesmann · ‎Nov 4 2024

Congratulation, well done, well deserved!

rwiesmann · ‎Oct 24 2024

I like it...better visible now

rwiesmann · ‎Oct 22 2024

Hi Mau, as I know you have to go with either: CAB-9K10A SW= CAB-ACS= Let me know if you need further information. rgds roger

rwiesmann · ‎Oct 21 2024

In this case you need another administrator of this organization to unlock you: described here... https://documentation.meraki.com/General_Administration/Managing_Dashboard_Access/Locked_Out_of_Dashboard

rwiesmann · ‎Oct 21 2024

The following documentation should help you: https://documentation.meraki.com/General_Administration/Inventory_and_Devices/Moving_Devices_between_Organizations rgds roger

rwiesmann · ‎Oct 15 2024

done

rwiesmann · ‎Aug 1 2024

Well done, congratulation to all of you!

rwiesmann · ‎Jul 29 2024

Congrats to all winners and thanks to @AmyReyes and Team!

rwiesmann · ‎Jul 28 2024

@rhbirkelund congratulation and well deserved!

rwiesmann · ‎Jul 25 2024

Well deserved @rhbirkelund, congratulation!

rwiesmann · ‎Jul 23 2024

Hi, is there a possibility to reflect public holydays within an MV Schedule. Lets say I have a schedule to collect video footage on workdays only at night and for the weekend for 24 hours. Is it possible to treat a public holyday on wendnesday as a weekend day dynamically. This would also mean that deposite country specific public holydays. Or is there a different way to do so? rgds roger

rwiesmann · ‎Jul 23 2024

What is your native vlan? Set it to the vlan which you have the managment ip of the ap.

rwiesmann · ‎Jul 22 2024

Keep going...well done all of you!

rwiesmann · ‎Jul 16 2024

I need to get used to it and but also mixed feelings currently. Still I understand the need of it Thanks for the info

rwiesmann · ‎Jul 16 2024

Done and ready to be the lucky one to win 🙂

rwiesmann · ‎Jul 15 2024

Great progress and well done. Keept collecting points. 💪

rwiesmann · ‎Jul 8 2024

Good progress and the list is getting populated...good luck and keep collecting points!

rwiesmann · ‎Jul 2 2024

Did you try a factory reset of the AP? I would start with that. https://documentation.meraki.com/General_Administration/Support/Resetting_Cisco_Meraki_Devices_to_Factory_Defaults#:~:text=MR%20Access%20Points,-Outdoor%20Access%20Points&text=To%20reset%20an%20outdoor%20Access,point%20for%2010%2D15%20seconds. Also check the DHCP setting...is the GW the right one and reachable.

rwiesmann · ‎Jul 1 2024

Congratulation and well deserved @MauroF + @stgonzo + @PaulF and the twelve! Like the extension to tweleve also @AmyReyes .

rwiesmann · ‎Jul 1 2024

Well, let the fun start and collect kudos!

rwiesmann · ‎Jun 4 2024

The may stars! 🙌 Congratulation and well deserved!

About rwiesmann

rwiesmann

Roger Wiesmann

Community Record

Badges