Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About tantony
Community Record
305
Posts
60
Kudos
4
Solutions
Badges
03-11-2019
09:49 AM
I have another connection, but it's not that reliable. I'm waiting for the USB modem to arrive as a backup. We were using a Cisco 2900 router a few months ago with the same issue.
... View more
03-11-2019
09:45 AM
Thank you, I think it's the modem / ISP, but I jsut want to make sure everything is correct on the Meraki side. I opened a case with Meraki, and they're also checking.
... View more
03-11-2019
09:06 AM
When the issue occurs, I can access the wired.meraki.com page. It does not report connection to cloud. It says "something went wrong". I can ping our public IP, but not the LAN 10.1.10.1 on the modem. I can ping 10.1.10.4, which is the Meraki. When the issue occurs, and I do a tracert, it goes out of the Meraki network, then times out. When the connection is back, it goes through the Meraki, then through the modem. Am I missing something? The ISP already replaced the modem because of the same issue, but the new modem did a software update, and this started happening again.
... View more
03-08-2019
07:18 PM
I had to make some minor changes, but thanks for everyone's help.
... View more
03-08-2019
04:41 PM
2 Kudos
Thanks. I caught that mistake after a few minutes. I should stop drinking tea before logging into Meraki to slow down my typing :). I also enabled SMS authentication.
... View more
03-08-2019
10:39 AM
Thanks, so there's nothing to stop it? My Symantec scan found no viruses.
... View more
03-08-2019
10:31 AM
Yes, that's the correct URL, but my browser auto completes it to the link on my post.
... View more
03-08-2019
10:28 AM
When I try to go to dashboard.mearki.co/m, it takes me to dashboard.mearki.co/m/?js=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJqcyI6MX0.fADWc9hUOlh58R9UzufQBROmie3I7c7vE835oE6YmU4&uuid=59e3dfd2-41cf-11e9-a407-e65cedabf5ba, and I'm getting alerts from Symantec Endpoint Protection.
A high-risk intrusion was detected on Tony Antony Laptop within group Share Group on 3/8/2019 1:24:03 PM.
IPS Alert Name Web Attack: Malicious Redirection 21
Status Blocked
Attack Signature N/A
Targeted Application N/A
Attacking IP 162.210.196.172
Targeted IP 172.16.2.235
Targeted Port Number 61382
... View more
03-08-2019
08:10 AM
Our Internet keeps going down every once in a while. Of course, the ISP says everything looks fine on their side, and Meraki says they don't see anything either. I didn't see anything in the Meraki's event log either. I do see DoS attacks on our modem, but there's nothing we can do about that. They said we could try changing our static IP. When the Internet goes down, I can ping the Meraki's LAN IP, 10.1.10.4, but not Comcast's LAN gateway 10.1.10.1. This usually happens after the modem does an automatic software update, but apparently, there's no way to stop the automatic update. I'm just wondering if anyone experienced anything similar? Anything else I'm missing to check on the Meraki or on the modem? We're supposed to get fiber soon, so I hope once that happens, everything will be normal.
... View more
03-08-2019
06:38 AM
ok thanks, I'm not using load balancing, so I'll leave the settings to default.
... View more
03-08-2019
05:44 AM
From our ISP, we're getting 100 down and 20 up. When I do a speed test, I get 125 down and 20 up. On the Meraki, I have WAN 1 and WAN 2 set to maximum Mbps (450). Is it recommended to just leave it at that, or does it makes a difference if set them to 100/20?
... View more
03-07-2019
10:57 AM
1 Kudo
Thank you both. My first time using WAN 2. Good to have a back up.
... View more
03-07-2019
10:46 AM
Yes, the DSL is only for redundancy. If I turn off load balancing, if the primary fails, secondary will still take over automatically correct?
... View more
03-07-2019
10:42 AM
Thanks, I just saw that. I have my WAN 1 as the primary uplink, and I have load balancing enabled. My public keeps changing from Comcast and Verizon. The websites are loading slow. Should I turn off load balancing?
... View more
03-07-2019
10:32 AM
I have two WAN connection to the MX68. WAN 1 i s Comcast cable, and WAN 2 is the slower DSL type connection. When I go to look up my public IP, it's showing the slower DLS Verizon connection. How can I change this? I only want the slower connection to take over when the primary fails.
... View more
03-07-2019
08:27 AM
ok, do I need to change any settings in the Meraki dashboard? Would it detect the WAN 2 and fail over automatically?
... View more
03-07-2019
08:21 AM
Our Comcast connection keeps dropping, and we don't have a cellular modem to use as backup. I do have a Verizon Jetpack which works. I was going to connect the Jetpack WiFi to a laptop, and then connect the laptop to the MX68 by connecting laptop's NIC card connected to MX WAN 2. Would this work? Is this a crazy idea? I couldn't find anything in the forum.
... View more
03-04-2019
11:05 AM
I added the NPS role in the Windows server, and added my laptop as the RADIUS client to test, so far it's working fine. Only members of the VPN group can VPN. This is good. Couple of question. For the port number for RADIUS in Meraki, do I use 1812 or 1645? Because when I was setting up NPS in Windows, I think it was 1645. Next question is, I know I'm suppose to use the highest numbered VLAN. Just to make sure I'm doing this correctly, I have VLANs 2,3 and 4 in the Meraki. My highest numbered is obvisously VLAN 4, but it's used for a static route to a Juniper firewall. VLANs 2 & 3 are Meraki networks. So if I want to access the Juniper network when I VPN, I should use VLAN 4 correct?
... View more
03-01-2019
12:41 PM
I like to use split tunneling for VPN, but by reading below, it says I can only configure it after I connect to VPN. So there's no way to configure this on the Meraki? This is my understanding of split tunneling. If I enable this, when someone is connected to VPN, internet traffic will not go through the Meraki, but only allowed private subnets. Is this correct? I have a script that creates a VPN connection on Windows and unchecks "Use default gateway on remote network". Is this all I need to enable split tunneling? https://documentation.meraki.com/MX/Client_VPN/Configuring_Split_Tunnel_Client_VPN
... View more
03-01-2019
02:38 AM
Thank you. I’m using the native Windows vpn client. So assuming I’m using RADIUS, do I just login with my normal Windows login for example. Username = mjackson password = password
... View more
02-28-2019
04:26 PM
1 Kudo
Looks like this explains what I’m trying to do. I guess I can use AD logins even if using RADIUS. Since Meraki is the RADIUS client I have to put its IP address. Do I use the Meraki public IP? https://youtu.be/KxzqQNMeNlA
... View more
02-28-2019
04:15 PM
So if I understand, I have to manually create usernames and passwords for RADIUS. In that case, the user can’t change their passwords unless I change it for them? I’m not familiar with RADIUS so I could use all help I can get.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 1917 | 05-17-2019 12:25 PM | |
| 15572 | 05-10-2019 07:18 AM | |
| 9292 | 04-15-2019 06:02 AM | |
| 39734 | 01-29-2019 09:26 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 6 | 21306 | |
| 4 | 1878 | |
| 4 | 58533 | |
| 3 | 2945 | |
| 2 | 1524 |
