Meraki

RaphaelL

I still don't understand why the switch would perform DNS inspection

RaphaelL

Take packet captures. Packets don't lie. Are the phones sending their packets with the DF bit set ?

RaphaelL

I wasn't aware of that presentation. Such a great read !

RaphaelL

Where is that 20ms limit from ?

RaphaelL

Hi , https://developer.cisco.com/meraki/api-v1/get-network-clients/ are you using this endpoint ? You can filter on manufacturer , deviceTypePrediction

RaphaelL

Does it let you save the config ?

RaphaelL

Hi , According to this document the answer is no https://documentation.meraki.com/Platform_Management/Troubleshooting_and_Support/Support/AI_Assistant_for_Networking but : However, the functionalities within it follows the tiers of the underlaying features it is leveraging. For instance, if PCAP Analysis is an Advantage tier feature, you only get it in the Assistant if you have Advantage tier.

RaphaelL

Closing the loop on this , I'm now able to see the banner : I might have some cleanup to do.

RaphaelL

I really love the idea , but I'm afraid the limitations might kill the hype. 1- Does it work with SecurePort ? SecurePort requires that the AP is in the same network as the switches 2- Can it support a more complexe naming scheme ? Our APs do not end with the SEQ number. AP + Unique LOC ( 3 letters ) + Floor ( 2 Chars ) + SEQ ( 2 Chars ) + ZZ

RaphaelL

It worked , but still not pleasant.

RaphaelL

Hi , Can't change password because I'm required to click on remind me later or set up OTP , but can't set up OTP because password is expired. This is a nice loop, I'm lucky to have another account but I'm 100% locked out. I will try to "forget my password" to see if I can't cheat this loop.

RaphaelL

45Gbps in a DMVPN setup with a 25Gbps interface ?

RaphaelL · ‎Nov 7 2025

Can any of you try a port that is down/disconnected ? Ports that are Up are working on my end , only ports that are down are affected. odd..

RaphaelL · ‎Nov 7 2025

Hi , Just noticed that some of my scripts are no longer working this morning. https://api.meraki.com/api/v1/organizations/xxxxxx/devices?perPage=5000 {"errors":["The perPage parameter must be between 3 and 1000"]} I have always used perPage=5000 and it is still listed in the documentation : https://developer.cisco.com/meraki/api-v1/get-organization-devices/ The number of entries per page returned. Acceptable range is 3 - 5000. Default is 1000. Is this intended ? I might open a ticket but I'm pretty sure Oren is already lurking 👀😆

RaphaelL · ‎Nov 6 2025

And you are sure this is port 25 ?

RaphaelL · ‎Nov 6 2025

that's not possible. Trunk ports do not support Access policy. You either have the wrong port or something is wrong with your config.

RaphaelL · ‎Nov 6 2025

And as long as these routers ( no longer a security appliance ) will be running MX code , you can say goodbye to performance.

RaphaelL · ‎Nov 6 2025

I don't know where the next MX will be positionned ( Small or medium ) but it won't be named MXxxxx that's for sure

RaphaelL · ‎Nov 5 2025

@Oren , @MinseK We are going to enable AI-RRM on a large Organization ( 5100 APs ) before the end of the year. I'm still wondering if the raw data will be available via API. I'm trying to "sell" this licence/feature to management and prove this was a good investissement. I can see that we have these graphs directly from the dashboard : Having these scores via API would help us a lot.

RaphaelL · ‎Nov 5 2025

For sure , as mentionned by alemabrahao and Philip , you might encounter limitations.

RaphaelL · ‎Nov 5 2025

I haven't tried it , but I think you could use the L7 rules on the firewall page on your MR

RaphaelL · ‎Nov 5 2025

Not surprised at all to see Oren here ! He's doing a great job especially with APIs !

RaphaelL · ‎Nov 5 2025

If I create a read-only admin, Can he create an API Key? Yes. And if API Key was created by a full admin, even if a Log as a read-only admin on dashboard, API key is same one, right? No , API key are created per user , but it can be shared ( but please don't do that )

RaphaelL · ‎Nov 5 2025

What is the actual transmit power used by the APs ?

RaphaelL · ‎Nov 4 2025

The good old MX650 that was renamed to C8455 is finaly alive !

About RaphaelL

RaphaelL

Raphael Letourneau

Community Record

Badges