MX - VRFs 26.1.2

[RaphaelL]

Hi ,

So VRFs are finaly here on MX. I just deployed MX 26.1.2 on my C8121

What's new

• Added support for configuring Virtual Router Forwarding domains (VRF) through the Early Access feature program.

So that's true , I can configure the VRFs from the page Organization -> VRFs

But according to my dashboard and documentation : https://documentation.meraki.com/SASE_and_SD-WAN/MX/Design_and_Configure/Configuration_Guides/Networ...

• VRFs are supported on MX 26.1.3+ in Routed Mode.

• 7 VRFs can be configured within a dashboard organization to be used in addition to the Default VRF.

So TL;DR , I can configure VRFs but not use VRFs at the moment , am I missing something ? 

Is the limit 7 custom VRFs + default = 8  or  6 custom VRFs + default = 7 ? The messages are misleading for a non-native english speaker.

[Inderdeep]

Good, Finally 

[Ryan_Miles]

Limit is 8. If you attempt to add more it produce this.

[RaphaelL]

Were you able to configure a VRFs on a vlan ? 

I think I have to wait for 26.1.3 to test it out

[DarrenOC]

@RaphaelL , @Ryan_Miles - is 8 a hard limit for just the MX or for a Network?

[RaphaelL]

8 VRFs appears to be the hard limit for an org at the moment.