is there any encryption implemented yet for syslog? my policy demands the connection to be secure and not just a raw syslog transmission to our syslog server ... View more

I had the same problem and swapping the primary and secondary MX has solved the problem. Thank you! ... View more

2023-  I just had a similar issue. -  The SSID had the setting mandatory DHCP enabled.- After setting Mandatory DHCP to disabled the clients worked as expected without issues.  The real issue was that Meraki Dashboard does not have an information bubble explanation next to this setting - as they do on almost all other settings that can be changed.  Even Worse the Dashboard logging made it look like the devices were talking to AP's and connected without issues, even though they were not connected, and all users were not talking on the actual network.  I was relying on the dashboard to report errors on clients but it had none.  Hopefully this helps someone in future.   ... View more

This is exactly what it was. Being new to the org and setting up Merakis, I didn't know they had this configured. Thank you for the help! ... View more

Hello all. Does anyone know 1)whether the logs are definitive on spoofing taking place, and 2)whether devices would be blocked if this option is enabled?   I hesitate to enable as I reviewed our logs which show laptops on our (flat) network are being flagged. However, these are company laptops that are on the corp wifi, which have obtained the correct DHCP.   I already read the article for Meraki MXs Anti-spoofing. We have the MX appliance and just Dell switch, no VLANs.   Thanks. Examples:   Time(PST) Client Event type     12/13/2022 10:11 laptop1 Source IP and/or VLAN mismatch     12/13/2022 10:11 laptop2 Source IP and/or VLAN mismatch                         ... View more

Before we can assist you any further, you'll have to let us know what the client machine is. Specifically if you can let us know what the actual network interface card (NIC) model is. ... View more

Hello.   I have a problem with the same error but when I connect a Cisco 7940 Series phone to my Meraki MS355-24 switch, when I connect the phone to the port, the port immediately blocks and I get the Very high proportion CRC error. I have already used several different cables, but I don't know what is causing the error.   Thank you ... View more

I would suggest that you start by upgrading your firmware version, as 27.7.1 is now quite old.   Ideally, you should be running the latest stable 28.7.1 which improves the connectivity with the Meraki Cloud, if the problems persist, then a more in-depth investigation will be necessary, however, this firmware upgrade should be your first step. ... View more

Thanks for coming back and letting everyone know. ... View more

May I ask, how do I view the retained video when the camera is moved? ... View more

Ta da! 🎉 Meraki swag is now available in the Cisco Store. Get yours here: https://merchandise.cisco.com/featured/cisco-meraki.html 💚 ... View more

this is still a common issue as of Sept 2022,  we are on the most updated firmware. we've had about 40 instances in the last 2 months where we had to call support.    no permanent fix in sight.     ... View more

@spxmeraki2022 it is unlikely that 29.3 will become stable, it is more likely thst 29.4 or similar will be a release candidate and then possibly become stable. ... View more

Hi Dena,   Did you discover the real problem? ... View more

Case 08421059 [ref:_00D606uBw._5006Q1sxTIr:ref] We have the same issues as most people here requiring escalation of a ticket (proper support level) Do we need to involve Cisco account management every time we require support from  Meraki? Being used to Cisco TAC support we see there is a long way to go for Meraki unless the focus is to only sell to small/medium business customers. ... View more

Thanks @PhilipDAth !   I was not aware of those links. These will certainly help in the future. I just wish they would put images on the product page for each device. Maybe Amazon has spoiled me  =( ... View more

Hi @Brentc76  I'm just wondering if you have found a way to fix it... Cheers, Navid ... View more

Upgraded finally to 28.6 and once again, running into stability issues with the scanners. Having to roll back. ... View more

Hi,   You can find here:   Just toggle the two slider buttons off and refresh page.   ... View more

How do we migrate wireless clients from Meraki DHCP(NAT Mode) to an internal DHCP server(Bridge Mode) seamlessly? Any Suggestions. ... View more

@NolanHerringI think you are right.  After investigating the Network-Wide -> Traffic Analytics, I'm seeing clients connected for the last 30 days.  So, even though the Wireless -> SSID Availability showed No AP's matching the tag, clients would not have been able to connect to the SSID if it wasn't broadcasting.  ... View more

In my scenrario I couldn't break 150mb on wifi when the AP itself could speedtest at 350+. Interestingly enough when I turned off meraki standard traffic shaping for the SSID I'm using as my test case, speeds doubled or came close to max for 2x2 streams. This includes testing at fast.com, speedtest.net and other major testing sites. Hopefully that helps others as part of their troubleshooting... ... View more

In the access point page (not access points list) and in the LAN tab ... View more

Could @Meraki confirm the tests I made are accurate about Priority and Bandwidth and that it is how it is supposed to react ?   thanks ... View more