Wireless Client Isolation

[Rushan_Thilina]

What is the Layer 2 LAN isolation enabled / disabled in bridge mode only? can explain any one? and i want to make wireless users like NAT mode but i need issue manageable IP issue from my DHCP server, if i enable this isolation mode? is it clients are not communicate each other?

[ww]

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Wireless_Client_Isolation#Overview

In nat mode the mr is dhcp server and assigns  the user a IP.

[Inderdeep]

@Rushan_Thilina : apart from what @ww said, In the NAT mode: Use Meraki DHCP

Clients receive IP addresses in an isolated 10.0.0.0/8 network. Clients cannot communicate with each other, but they may communicate with devices on the wired LAN if the SSID firewall settings permit.

Check this thread as well

https://community.meraki.com/t5/Wireless-LAN/LAN-isolation/m-p/59075

[Agus]

That correct, if isolation mode enable between each client on same network will cannot communicate. correct me i'm wrong.

Thanks