[Radius Test] Pass 1 Fail 40.

Snika
Getting noticed

[Radius Test] Pass 1 Fail 40.

Snika_0-1732718691102.png

 

When I did a Radius test, authentication failed on many APs.

However, unlike the test results, I can connect wirelessly to all APs in the office.

But why does the test fail?

3 Replies 3
Inderdeep
Kind of a big deal
Kind of a big deal

check this one 

https://community.meraki.com/t5/Wireless/Radius-Server-Testing-Failed/td-p/59508

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
PhilipDAth
Kind of a big deal
Kind of a big deal

What does your RADIUS server log say?  Usually it will give a reason for a failure.

pjc
A model citizen

What model AP's are these ? Is this a TLS version limitation that earlier TLS versions on older AP models such as MR32's etc are now no longer supported ?

Get notified when there are additional replies to this discussion.