Thanks for help !
Solved! Go to Solution.
Thanks for your reply, here is my firewall configuration, normally everything passes.
I have already tried in Bridge Mode but the problem persists 😞
Follow this document and check it helps you
When you configure another port directly into vl100 and connect your notebook to it, do you get an ip?
Just to sort out a problem "behind" Meraki AP.
Is vl100 in your switch uplink to your Coreswitch/Firewall?
Is it working with the cisco classic AP? Connected to the same switch or another?
Start a packet capture on AP lan port.
Connect to the New ssid.
Open the capture
Filter on "bootp" and see if some dhcp traffic is tagged for vlan100. And what is missing
@CESI Is the DHCP server directly connected to VLAN 100 or is there a DHCP helper entry on the routed interface/default gateway of VLAN 100 pointing at the DHCP server?