Where to find vlan summary in Meraki MS220 siwtch?

SOLVED
Merakibgp
Getting noticed

Where to find vlan summary in Meraki MS220 siwtch?

Hi In Meraki switch MS220 page, we can see the summary of all of its ports, but I cannot see its vlan status or its summary. Does it have the summary for its vlan? and can we use command line for configuration? Thanks

1 ACCEPTED SOLUTION
Adam
Kind of a big deal

There is no equivalent command or CLI.

 

If you just want to see a list of the VLANs you'd go to 

Security Appliance>Addressing and VLANs

or

Switch>Routing and DHCP

 

If you want to see what ports are in specific VLANs then you'd want to go to Switch>Switch Ports and search/filter accordingly. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.

View solution in original post

9 REPLIES 9
ww
Kind of a big deal
Kind of a big deal

no command line. 

go to switchports. pres the + to add more columns and select vlan. you can use the search to filter on vlan or tags or duplex etc

Adam
Kind of a big deal

Or if you want to see all ports in a given vlan you can go to Switch>Switch ports then click the drop down box in the search window and input the vlan number. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Merakibgp
Getting noticed

Thanks for your reply. I want to see vlan summary. it looks like Meraki does not have it, right? In Cisco, it is show vlan.

Maybe we can see it in layer 3 switch

Adam
Kind of a big deal

There is no equivalent command or CLI.

 

If you just want to see a list of the VLANs you'd go to 

Security Appliance>Addressing and VLANs

or

Switch>Routing and DHCP

 

If you want to see what ports are in specific VLANs then you'd want to go to Switch>Switch Ports and search/filter accordingly. 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Merakibgp
Getting noticed

I found "Security center" which is located under Organization, but i could not find "Security Appliance>Addressing and VLANs". Where is "Security Appliance"?  Can you tell? Thank you!

You can see layer 3 VLANs, because they have an IP address configured on them - but there is no where to see a list of all the configured layer 2 VLANs.

Merakibgp
Getting noticed

we do not need to create vlan in Meraki switch like Cisco switch. as long as we assign a vlan to port, the vlan already is created. i am right? 

That is correct.

BlakeRichardson
Kind of a big deal
Kind of a big deal

@Merakibgp this might help you.

 

Meraki VLAN.png

 

It generates a view that looks like this

 

Screen Shot 2018-07-13 at 9.10.05 AM.png

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels