Where to find vlan summary in Meraki MS220 siwtch?

[Merakibgp]

Hi In Meraki switch MS220 page, we can see the summary of all of its ports, but I cannot see its vlan status or its summary. Does it have the summary for its vlan? and can we use command line for configuration? Thanks

[ww]

no command line. 

go to switchports. pres the + to add more columns and select vlan. you can use the search to filter on vlan or tags or duplex etc

[Adam]

Or if you want to see all ports in a given vlan you can go to Switch>Switch ports then click the drop down box in the search window and input the vlan number. 

[Merakibgp]

Thanks for your reply. I want to see vlan summary. it looks like Meraki does not have it, right? In Cisco, it is show vlan.

Maybe we can see it in layer 3 switch

[Adam · Accepted solution]

There is no equivalent command or CLI.

If you just want to see a list of the VLANs you'd go to 

Security Appliance>Addressing and VLANs

or

Switch>Routing and DHCP

If you want to see what ports are in specific VLANs then you'd want to go to Switch>Switch Ports and search/filter accordingly. 

[Merakibgp]

I found "Security center" which is located under Organization, but i could not find "Security Appliance>Addressing and VLANs". Where is "Security Appliance"?  Can you tell? Thank you!

[PhilipDAth]

You can see layer 3 VLANs, because they have an IP address configured on them - but there is no where to see a list of all the configured layer 2 VLANs.

[Merakibgp]

we do not need to create vlan in Meraki switch like Cisco switch. as long as we assign a vlan to port, the vlan already is created. i am right? 

[PhilipDAth]

That is correct.

[BlakeRichardson]

@Merakibgp this might help you.

It generates a view that looks like this