cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Meraki MS switches interoperability

SOLVED
Here to help

Meraki MS switches interoperability

Hi all,

 

Has anyone used Cisco SFP-10G-SR in Meraki MS-400 series switches ?

 

I know they are not on the certified list, just wondered if anyone has tried them and used successfully.

 

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal

Re: Meraki MS switches interoperability

I have never tested it, but I have been told that Cisco Meraki kit does not check the manufacturer ID burned into the SFP ROM (unlike Cisco Enterprise kit which does).

5 REPLIES 5
Ben
A model citizen

Re: Meraki MS switches interoperability

We used the meraki sfp modules on a Zyxel switch and they worked just fine. So I would say give it a go.
Worst case : no connection..

Cheers
Ben
Kind of a big deal

Re: Meraki MS switches interoperability

I have never tested it, but I have been told that Cisco Meraki kit does not check the manufacturer ID burned into the SFP ROM (unlike Cisco Enterprise kit which does).

Conversationalist

Re: Meraki MS switches interoperability

I’m using from Fiberstore $16 SFP modules on MS225 and MS250 switches and they work fantastically.

A model citizen

Re: Meraki MS switches interoperability

I have got Cisco SFP-10G-SR-C SFP´s working well in Meraki MS225-48LP.

 

Here to help

Re: Meraki MS switches interoperability

I also use Fiberstore SFP modules in my MS350 switches as well as my MX250 firewalls. No problems.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.