MX84 Swaps

Solved
Chawnce11
Conversationalist

MX84 Swaps

Hi All,

 

This weekend we will swap MX84s. We plan to use Method 1 on this link: https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ...

 

1) Do you recommend the article to be accurate?

2) We are replacing previous MX84 with an MX84 that was configured previously on another network. Will the cold swap configuration overwrite the previous? Or do we have to manually remove that somehow?

 

Thanks all in advance,

Matt

1 Accepted Solution
ww
Kind of a big deal
Kind of a big deal

if you previous uplinks where on dhcp and the one you are replacing is also, it should work. however i would factory reset it anyway before adding it to a network again.

View solution in original post

2 Replies 2
ww
Kind of a big deal
Kind of a big deal

if you previous uplinks where on dhcp and the one you are replacing is also, it should work. however i would factory reset it anyway before adding it to a network again.

Liem-Thanh
Conversationalist

It is recommended to restore the settings before adding to the network

 

Get notified when there are additional replies to this discussion.