Meraki MS switches interoperability

[StormTrooper]

Hi all,

Has anyone used Cisco SFP-10G-SR in Meraki MS-400 series switches ?

I know they are not on the certified list, just wondered if anyone has tried them and used successfully.

[Ben]

We used the meraki sfp modules on a Zyxel switch and they worked just fine. So I would say give it a go.
Worst case : no connection..

Cheers
Ben

[PhilipDAth · Accepted solution]

I have never tested it, but I have been told that Cisco Meraki kit does not check the manufacturer ID burned into the SFP ROM (unlike Cisco Enterprise kit which does).

[pinchusg]

I’m using from Fiberstore $16 SFP modules on MS225 and MS250 switches and they work fantastically.

[PS_Mike]

I also use Fiberstore SFP modules in my MS350 switches as well as my MX250 firewalls. No problems.

[redsector]

I have got Cisco SFP-10G-SR-C SFP´s working well in Meraki MS225-48LP.