Meraki

PS_Mike · ‎Jun 28 2022

I'll add that we are currently on 14.33.1, but this same issue has also happened on previous firmware versions as well.

PS_Mike · ‎Jun 27 2022

I have quite a few of these switches and we've had several of them, at different times and different firmware, stop passing traffic on any POE enabled port. This takes down some conferencing equipment along with any access points connected to the switches. When I view the switch in the dashboard, the POE enabled ports are all black with the POE symbol lit up. Has anyone seen this behavior before and know what is causing it? Anything we can do to prevent this? I have a case open with Meraki but since I had to reboot the switch to bring the APs up, I'm not sure how much help they will be since they probably can't get any logs from the switch. The only indication of a problem in the event log on the dashboard when this happened are the ports suddenly going offline.

PS_Mike · ‎Dec 15 2021

An easy way to do this is create a new network with the regulatory domain set for the destination network you will be moving them to, move the APs to this network and then you should be able to move them to the original destination network, You can then delete the new, temporary network you created. I've had to do this several times and it works like a charm each time.

PS_Mike · ‎Jun 24 2019

I have a new avatar.

PS_Mike · ‎Apr 2 2019

I've used both SFP-10GSR-85 and SFP-10GLR-31 from Fiberstore.com without issue. I would add that these have been used in both MS-350 and MX250.

PS_Mike · ‎Mar 13 2019

I also use Fiberstore SFP modules in my MS350 switches as well as my MX250 firewalls. No problems.

Meraki

Community

About PS_Mike

PS_Mike

Community Record

Badges

Re: MS355-48X2 POE Enabled ports go offline

MS355-48X2 POE Enabled ports go offline

Re: Moving AP to another network

Re: Update your avatar, win Meraki swag!

Re: 10GBaseT SFP+

Re: Meraki MS switches interoperability

Re: Update your avatar, win Meraki swag!

Re: 10GBaseT SFP+