Meraki MS switches interoperability

SOLVED
StormTrooper
Here to help

Meraki MS switches interoperability

Hi all,

 

Has anyone used Cisco SFP-10G-SR in Meraki MS-400 series switches ?

 

I know they are not on the certified list, just wondered if anyone has tried them and used successfully.

 

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

I have never tested it, but I have been told that Cisco Meraki kit does not check the manufacturer ID burned into the SFP ROM (unlike Cisco Enterprise kit which does).

View solution in original post

5 REPLIES 5
Ben
A model citizen

We used the meraki sfp modules on a Zyxel switch and they worked just fine. So I would say give it a go.
Worst case : no connection..

Cheers
Ben
PhilipDAth
Kind of a big deal
Kind of a big deal

I have never tested it, but I have been told that Cisco Meraki kit does not check the manufacturer ID burned into the SFP ROM (unlike Cisco Enterprise kit which does).

I’m using from Fiberstore $16 SFP modules on MS225 and MS250 switches and they work fantastically.

I also use Fiberstore SFP modules in my MS350 switches as well as my MX250 firewalls. No problems.

redsector
Head in the Cloud

I have got Cisco SFP-10G-SR-C SFP´s working well in Meraki MS225-48LP.

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels