Automated switch port configuration

SOLVED
WyldStallynz
Conversationalist

Automated switch port configuration

Hi all,

 

Is anybody aware of a way to mimic traditional Cisco's auto smart port configurations when clients connect/disconnect on Meraki hardware?

1 ACCEPTED SOLUTION
Inderdeep
Kind of a big deal
Kind of a big deal

@WyldStallynz : You can do it via API call 

https://developer.cisco.com/meraki/api-v1/#!update-device-switch-port 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

View solution in original post

4 REPLIES 4
Inderdeep
Kind of a big deal
Kind of a big deal

@WyldStallynz : You can do it via API call 

https://developer.cisco.com/meraki/api-v1/#!update-device-switch-port 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

I was really hoping that Meraki would've had ready templates to make this simple for me but it definitely appears to be a step in the right direction - thanks Inderdeep!

BrandonS
Kind of a big deal

No, but I *hate* that feature and it never did anything but cost me time and money by trying to outsmart me and configure ports dynamically in a way I didn’t intend or even know was being set.  Do you really like the feature?  I am curious to hear how it has worked well for you and on which switches. It was the SMB switches like SG300/500 series that drove me nuts..

 

There is one feature supported on some MS and MR models called SecureConnect that seems somewhat useful is limited situations, I guess: https://documentation.meraki.com/MS/Access_Control/SecureConnect

- Ex community all-star (⌐⊙_⊙)
thomasthomsen
Head in the Cloud

You "kinda" have some of that functionality now with "SecureConnect" - That reconfigures your AP ports, and actually authenticates the AP on the port, so win win.

 

If only they would extend this functionality between switches, and make it so you could for example limit the number of VLANs on the secured port (or have a SecureConnect port template config you could change, one for APs one for switches, and so on 🙂 ), then it would be absolutely awesome.

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels