MV2 still unreachable after the power comes up

Andre_Afonso
Here to help

MV2 still unreachable after the power comes up

Hi Guys,

 

I have on site with one MX67W one MR33 and one MV2.

In the MR33 I had created 2 SSID to connect the MV2 Wireless profiles (Principal and Backup).

The costumer is facing some power issues that makes the whole network get´s down. When they the devices come back online, the MV2 get´s unreachable to the dashboard but is connect to the power, I guess is because we can´t establish a connection to MR33.

 

Is anyway to fix this issue?

 

Regards,

 

AA

Andre Afonso
6 Replies 6
cmr
Kind of a big deal
Kind of a big deal

Put a UPS on the MX67 to power it and the MR33 (assuming it is PoE from the MX), you won't need a large expensive one.

Andre_Afonso
Here to help

Hi, a UPS was suggested to customer. But that doesn't fix the problem when MV2 try to connect to SSID after the power gets down.

Andre Afonso
ww
Kind of a big deal
Kind of a big deal

Try power it off. Bring it near the mr.  And power on.

 

Check the ap network if the mv try to connect to the ssid.

Andre_Afonso
Here to help

The MR is verry close from the MV.

Andre Afonso
BlakeRichardson
Kind of a big deal
Kind of a big deal

I would plug the MV directly into a POE switch if you can and confirm that the unit is good. Continual power issues could have cause an issue with it. 

Andre_Afonso
Here to help

For that you you need the additional hardware MA-PWR-ETH.

The problem here is, after the power come on, the camera get´s confusion and don´t know how to connect to SSID.

Andre Afonso
Get notified when there are additional replies to this discussion.