I have templates for networks that use the MX64. Recently for a new site a MX64W was ordered by mistake. I am wondering if I would be able to associate the MX64W to a template made specifically for the MX64?
If you wanted an MX64 instead of the MX64W can you just exchange it with your reseller? But worst case, just copy/clone an existing MX64 network and then assign the MX64W to it and it should get the majority of the settings except for the device name, static IP etc...
Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO If this was helpful click the Kudo button below If my reply solved your issue, please mark it as a solution.
A template for an MX64 would work on an MX64W. When going through the template setup, you will see that there are options for wireless settings. When applied, a template will apply those settings which pertain to that device. For instance, you can apply a Z1/Z3 to an MX64 template, but the device will not get Content Filtering settings because content filtering is not available on the device. Additionally, the Z1/Z3 will get the port settings for the first 4 ports in the MX template as the Z1/Z3 only has four usable ports.