cancel
Showing results for 
Search instead for 
Did you mean: 

Include an exception in a Syslog Server

SOLVED
Here to help

Include an exception in a Syslog Server

Hello All,

I'm configuring a Syslog Server in a MX64 to log URLs accessed by the clients, but I need to exclude one specific host from this. Is it possible?

 

Ex.: I want to log all URLs accessed by my LAN (10.0.0.0/24, for instance), except the host that have the IP 10.0.0.10.

 

I have enabled the Syslog Server in Network-Wide -> General - Logging, putting the IP of my Syslog Server and choosing the Role "URL". But, I coudn't find any way to prevent a client to have its URLs access logged.

 

Thanks in advanced!

 

Regards,

Guilherme Carvalho

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal

Re: Include an exception in a Syslog Server

AFAIK there's no way to filter what messages are sent. You likely will have to filter this out on the Syslog server side. 

4 REPLIES 4
Kind of a big deal

Re: Include an exception in a Syslog Server

AFAIK there's no way to filter what messages are sent. You likely will have to filter this out on the Syslog server side. 

Kind of a big deal

Re: Include an exception in a Syslog Server

I was thinking the same as @jdsilva

 

You'll just have to disclude or filter out the IP on the Syslog server side. 

 

Adam R MS | CISSP, CISM, VCP, MCITP, CCNP, ITILv3, CMNO
If this was helpful click the Kudo button below
If my reply solved your issue, please mark it as a solution.
Here to help

Re: Include an exception in a Syslog Server

Jdsilva, thanks for your reply. I'll just filter this in the server side.
Here to help

Re: Include an exception in a Syslog Server

Adam,

Thanks for your help.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.