No alert received when secondary uplink fails on mx-95

Smartsada007
Here to help

No alert received when secondary uplink fails on mx-95

We have 2 up-links configured in load-balancing mode.

When primary up-link fails, we receiving alert, but surprisingly no alert received when secondary failed but primary in working.

Please guide how to get alerts when any of up-link fails?

Thanks in advance..Meraki Gateway status 31.03.22.PNGAlerts Settings.PNG

 

6 REPLIES 6
MarcP
Kind of a big deal

Interessting, same "problem" as using a AGGR on switch uplinks. You only get a alert when both links went down.

In that case support also told me to make a wish.

Means have to wait till meraki will realize that this feature to be added 🙂

MarcP
Kind of a big deal

The more who request it, the sooner it will be added 🙂 

Already told my colluegues to do so 😄

alemabrahao
Kind of a big deal
Kind of a big deal

Another way could be to configure a monitoring system such as Zabbix to monitor these interfaces.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Mike6116
Getting noticed

Same problem here,  many of my MX have a secundary link  and im not being able to promptly detect when theese goes down,  also many times when we add a secundary link is because althought of redundancy there is a need for more bandwwith wich may be not possible over one link.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels