Hi All,
I have MX68CW-WW.
Could you please advise how to block IP address for inbound \ outbound traffic.
Thanks.
Solved! Go to solution.
Hi @Mad_Dog_82 , the firewall is stateful (edited @CptnCrnch 😉) so all inbound traffic is blocked by default. For outbound traffic you need to add a Layer 3 firewall rule.
Hi @Mad_Dog_82 , the firewall is stateful (edited @CptnCrnch 😉) so all inbound traffic is blocked by default. For outbound traffic you need to add a Layer 3 firewall rule.
Take a look here for config guidance:
Thanks for keeping me inline @CptnCrnch
If you happened to have inbound NAT/PAT rules configured with any source allowed then I would use the Layer 7 firewall to block Remote IP Range, this should block those IP's coming in on your NAT rules.