Has anyone successfully setup a policy based VPN to Multiple Meraki sites in the same org? Did you have to go to 15.x firmware?
So essentially you have one third party connection listed in your dashboard and it works for all enabled sites?
You can configure a 3rd party vpn with azure in the MX.
It also applies for Azure, AWS and any IPsec peer.
I have used for fortinet, Cisco ASA and another MX in different orgs
Yes thank you, I'm aware of that, but what did not work previously and I'm being told by a third party vendor may work now is the ability to have multiple sites in the same org peer to the same Azure Virtual network gateway.
We tend to do it using StrongSwan.
Im going to play the pure Meraki card here
Option 1 - vMX in Azure will do your AutoVPN to all participating networks
Option 2 - Beta Firmware (15.xx) and Azure VPN Gateway - I have done this, it is simple enough, but ive found that the tunnels were either a) really stable or b) really not.
The vMX is not much more expensive than a standard VPN Gateway, and if you couple a Reserved Instance with the vMX, it is very compelling
The other alternative is AZURE VIRTUAL WAN!! And if you do get that working, please let us know your experience.
I have to say, Philip's method is one im going to investigate however!
So thanks all. Option 2 that @JimmyPhelan mentioned is what I believe this vendor is saying. I much prefer vMX and have used it before and will stick with that if at all possible. I don't control the Azure environment in question so some negotiation will be necessary.
Mloraditch I am trying just to get one Meraki 64 to work on a policy based VPN. I have set up a new resource group for testing as out lined here http://arnaudpain.com/2019/08/27/azure-and-cisco-meraki-mx80-site-to-site-step-by-step-guide/#sthash... and my theory was to create another Public IP address in this group once i get this working . Unfortunately i see the Meraki saying connected but not the Azure that says connecting.
i even tried this https://www.virtualizationhowto.com/2017/08/configure-meraki-to-azure-site-to-site-vpn/ as one of the opening line is "Meraki is notoriously easy to". Oh no it isn't
Maybe Philip can help https://community.meraki.com/t5/Security-SD-WAN/Azure-VPNs/m-p/3201#M854
Anybody get this working would be great
Kevin