ECMS practice question - May 14th

Solved
SandroZ
Meraki Employee
Meraki Employee

ECMS practice question - May 14th

Another week has gone by and as usual brought a weekend and an ECMS practice question!

Comment below with what you think is the correct answer and remember: if you like the question or the ECMS questions initiative, leave a kudo.

See you in a week with the correct answer!

 

ECMS practice question

 

Which statement correctly describes the minimum Dashboard configuration requirements in order to turn on the wireless connectivity option for MV Cameras?

 

  1. A minimum of 1 wireless profile need to be defined and assigned as Primary
  2. A minimum of 2 wireless profiles needs to be defined and assigned, one as Primary and the other as Backup 
  3. A minimum of 2 wireless profiles needs to be defined and assigned, one as Primary and the other as Secondary  
  4. A minimum of 2 wireless profiles needs to be defined and assigned, one as Primary and the other as Secondary and Backup



P.S. We will be sharing new practice questions weekly! If you'd like to receive updates when we do, click the "ECMS Practice" label below and then "Subscribe”

 

Here you can find previous questions

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
1 Accepted Solution
SandroZ
Meraki Employee
Meraki Employee

The correct answer is C!

 

For more info https://documentation.meraki.com/MV/Initial_Configuration/MV_Wireless_Configuration_Guide

 

From the wireless profile window, select a Primary and Secondary SSID. A third Backup SSID is optional. 

Note: Two SSID profiles must be selected here. It is not possible to apply only a primary profile. Multiple SSID profiles allow for potential failover scenarios. The Meraki MV will prefer the Primary SSID and automatically failover to the Secondary followed by the Backup SSID.
 
SandroNardi_0-1621606602940.png

 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

View solution in original post

17 Replies 17
KarstenI
Kind of a big deal
Kind of a big deal

An easy one if this has been done before and pure guessing if not.

Well, I go for last weeks answer plus one.

@KarstenII c what you mean

 
DarrenOC
Kind of a big deal
Kind of a big deal

Defo C on this one.

 

have a good weekend everyone

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
kYutobi
Kind of a big deal

🌊the sea

Enthusiast
Inderdeep
Kind of a big deal
Kind of a big deal

👀

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
cmr
Kind of a big deal
Kind of a big deal

I Cee what you all mean, but for the life of me I cannot fathom out why it was done this way.  The likelihood is that both profiles refer to an SSID on the same AP or set of APs so I would prefer A better answer...

KarstenI
Kind of a big deal
Kind of a big deal


@cmr wrote:

I Cee what you all mean, but for the life of me I cannot fathom out why it was done this way.  The likelihood is that both profiles refer to an SSID on the same AP or set of APs so I would prefer A better answer...


So many times I asked myself "Why did they implement it *that* way ...". 

Oakley
Here to help

Would it be C, since you need a second one incase the first one is offline, guessing this is setup like this to make sure the cameras have a better chance of not going down. 

SandroZ
Meraki Employee
Meraki Employee

The correct answer is C!

 

For more info https://documentation.meraki.com/MV/Initial_Configuration/MV_Wireless_Configuration_Guide

 

From the wireless profile window, select a Primary and Secondary SSID. A third Backup SSID is optional. 

Note: Two SSID profiles must be selected here. It is not possible to apply only a primary profile. Multiple SSID profiles allow for potential failover scenarios. The Meraki MV will prefer the Primary SSID and automatically failover to the Secondary followed by the Backup SSID.
 
SandroNardi_0-1621606602940.png

 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

@SandroZ @DavidLowe @RafaelM    Massive thank you to Sandro, David and Rafael.  I passed my CMSS 500-220 ECMS Exam earlier today.  These practice Q&As, ECMS1/ECMS2 and documentation site really helped!!!

@AB_LaDigue67 : Congratulations buddy, Keep it up !

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com

@InderdeepThank You!

@AB_LaDigue67  Way to go!!!! So happy to see our practice questions helped! Congratulations on your achievement. Very well deserved!

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.


@AB_LaDigue67 wrote:

@SandroZ @DavidLowe @RafaelM    Massive thank you to Sandro, David and Rafael.  I passed my CMSS 500-220 ECMS Exam earlier today.  These practice Q&As, ECMS1/ECMS2 and documentation site really helped!!!


Congratulation! Now we only have to wait for the appropriate CMSS badge on the community profile ... 😃

@KarstenIthat would be icing on the Meraki Lime Cake yes 🙂

Greetings @AB_LaDigue67 please can I know how many questions are in the cisco meraki CMSS 500-220 ECMS Exam?

We are not allowed to share that officially.   Its a manageable number.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.