Meraki

RafaelM · ‎May 21 2021

Hello @squidgy Unfortunately, that is not a supported scenario. Dashboard will not even let you add your spare MX if it is not the same model as the first one. Please check the note in this document to see this subject in detail: https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair I hope this helps!

RafaelM · ‎May 21 2021

@AB_LaDigue67 Way to go!!!! So happy to see our practice questions helped! Congratulations on your achievement. Very well deserved!

RafaelM · ‎Feb 19 2021

Uuuuh... tricky!

RafaelM · ‎Feb 19 2021

After all the conversations that were had in this chat, I am happy to announce that the correct answer is... 🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁🥁 E! Traffic coming from that subnet bound to the internet will leave through the local breakout (split tunnel), and since there is no specific flow preference for that subnet, it will be load balanced! Thanks for tuning in. We're soon coming back with another question!

RafaelM · ‎Feb 5 2021

ECMS Question Refer to the exhibit. Assume that the MX in question is a spoke connected via AutoVPN to one hub using split tunnels, all its local subnets have been advertised over the VPN, and both its WAN connections are up. How will the MX route traffic sourced from subnet 172.17.25.0/24 destined for the internet? It will be sent out WAN1 as long as it is up. It will be sent out WAN2 as long as it is up. It will be sent out WAN1 as long as it meets the thresholds in the performance class called “Telepresence”. It will be sent out WAN2 as long as it meets the thresholds in the performance class called “Telepresence”. It will be load balanced between WAN1 and WAN2.

RafaelM · ‎Feb 5 2021

The correct answer is c! The network topology on the Meraki Dashboard supports both Meraki and non-Meraki devices. Options d an e were correct statements about the Layer 3 topology, not the Layer 2.

RafaelM · ‎Jan 29 2021

ECMS Question Look at the image below. It shows a layer 2 network topology diagram inside the Meraki Dashboard. Which sentence is true regarding the topology? It can be downloaded in JPEG format. It shows two devices that are offline. It supports both Meraki and non-Meraki devices. It is built based on the default routes (0.0.0.0/0) in the switches. It allows administrators to see static routes for particular nodes by hovering over them.

RafaelM · ‎Jan 29 2021

The correct answer is: b! The Change log! only one change log available per organization, so the timestamps are always in UTC! Thank you guys for participating!

RafaelM · ‎Jan 22 2021

ECMS Question What kind of logs are always stored in the UTC time zone inside the Meraki Dashboard? Event log Change log Video access log SM activity log

RafaelM · ‎Jan 22 2021

The correct answer is.... 1! We can use device tags (in this case, AP tags) in order to set the scope for the SSID availability feature. For more details about the types of tags, please visit the document article below: https://documentation.meraki.com/General_Administration/Organizations_and_Networks/Organization_Menu/Manage_Tags Thanks everyone for your input!

RafaelM · ‎Jan 14 2021

ECMS question Which sentence is true regarding the use of tags inside the Meraki Dashboard? Device tags can be used to determine the scope of the SSID availability feature. Network tags can be used to determine the scope of the SSID availability feature. Switches apply the recently-added tag to their ports by default. All network tags are static, and all SM tags are dynamic. All SM tags are static, and all network tags are dynamic.

RafaelM · ‎Jan 14 2021

The correct answer is D! All the other are false statements. If anything is not clear to you, please check out our documentation to find out more about SM features. Feel free to use this space for clarifications as well. https://documentation.meraki.com/SM

RafaelM · ‎Dec 10 2020

ECMS question Look at the image below. It contains information about a device managed via Systems Manager. Which sentence is true about that device? Between 9am and 5pm on weekdays and all day on weekends, some apps will be uninstalled from the device. Between 6am and 6pm on weekdays and all day weekends, some apps will be uninstalled from the device. The Corp security policy has been violated because a disk storage threshold was broken The device has been rebooted within the past couple of days.

RafaelM · ‎Dec 10 2020

Aaaaaaaaand... corect answer is: a. More references can be found on: https://documentation.meraki.com/MX/Content_Filtering_and_Threat_Protection/Threat_Protection Thank you for your participation on this one again!

RafaelM · ‎Dec 2 2020

ECMS question Fill in the blanks: When enabling IDS/IPS on the Meraki Dashboard, there are 3 different rulesets you can choose: You can leave it as ________ (default, matching CVSS 9 and 10), or you can change it to ________ (matching CVSS 10 only) or ________ (matching CVSS 8, 9 or 10). Balanced - Connectivity - Security Security - Balanced - Connectivity Connectivity - Balanced - Security Connectivity - Security - Balanced

RafaelM · ‎Dec 2 2020

Correct answer is: C. In order MS and MR advanced licenses, an organization needs to be in the PDL model. For more information about PDL, please visit: https://documentation.meraki.com/General_Administration/Licensing/Meraki_Per-Device_Licensing_Overview See you all soon again with another ECMS question!

RafaelM · ‎Nov 24 2020

@MerakiDave Of course! Everyone is welcome to participate! The prizes are knowledge, recognition and prestige inside this community 🙂

RafaelM · ‎Nov 23 2020

ECMS question Which sentence is true regarding the Per-Device Licensing (PDL) model for Cisco Meraki organizations? You no longer get a 30 day grace period after license expiration date. If your licenses are not activated within 90 days, they are automatically invalidated. PDL is a requirement in order to use MR advanced licenses in an organization. Licenses are cheaper in PDL compared to Co-termination.

RafaelM · ‎Nov 23 2020

The correct answer is 4. Network-wide > Configure > General. That is the only option that is available for all types of networks, including Camera and combined ones as well. Option 2. Camera > Configure > General is not a valid option on combined networks. I hope that helps!

RafaelM · ‎Nov 18 2020

ECMS Question On the Meraki Dashboard, where should you navigate to make sure your MV cameras are in the correct time zone, and change it if you need to? Cameras > Monitor > General Cameras > Configure > General Network-wide > Monitor > General Network-wide > Configure > General

RafaelM · ‎Nov 18 2020

The correct answer is B.6. For more information, please visit https://documentation.meraki.com/MS/Other_Topics/MS_Switch_Quality_of_Service_Defined

RafaelM · ‎Nov 9 2020

ECMS question How many class of service (CoS) queues are supported on MS switches? 4 6 8 10

RafaelM · ‎Oct 16 2020

Hello! Are you new to the world of the cloud-managed MS switches? If so, we've got a few resources to help introduce you to the solution. Getting Started MS Family Datasheet - MS Family Features and Specs MS Installation Guides - Model specific Product Diagrams and Installation steps MS Quick Start - Quickly get your MS online and talking to Meraki MS Best Practices - Best practice configurations across the majority of MS features MS Fundamental Implementation Training - Self-paced online training to learn how to onboard, deploy, and configure an MS Switch General Info Basic Features Virtual Stacking - Configure a single port or thousands of ports through our industry-first Virtual Stacking technology. Layer 7 visibility - See how the network is being used and by which client devices Network Topology - A graphic overview of the logical network topology and the status of any devices Layer 3 Switching - Layer 3 routing capabilities are available on most Cisco Meraki switches Quality of Service (QoS) - Prioritize and reliably deliver certain types of data Spanning Tree Protocol - Build a loop-free network LAN Redundancy features Physical Stacking - Get physical redundancy in the deployments that need it Link Aggregation - Bundle switch ports to increase throughput and provide redundancy LAN Security features Port schedules - Schedule activation of switch ports to add security and save power Access Policies (802.1x) - Prevent unauthorized devices from connecting to the network Switch ACL - Limit what traffic is permitted through the switch Please note, this is not an exhaustive list of all MS documentation or features. More advanced documentation beyond the basic features can be found at documentation.meraki.com! If you're interested in learning about Meraki's training offerings, be sure to check out The Meraki Learning Hub! There you'll find tons of great information about Meraki led training like CMNA and ECMS.

RafaelM · ‎Sep 28 2020

Hey @GaryShainberg Thank you for sharing your experience! I hope your initiative will drive more of the community members into our ECMS2 course. It was a pleasure to have you, and it will be awesome to see some of the other guys from the community there as well! Good luck on your next step (exam)! Keep us posted!

RafaelM · ‎Jul 22 2020

Hola @MarceMonteblanc Espero que se encuentre bién. Para resolver problemas con el registro para el FIT 1, hay que escribir al mail y esperar la respuesta. Eso puede tardar unos días, pero seguramente se resuelve. Hace cuánto tiempo escribió a ellos? Lo ha hecho en español o en inglés? Espero que en tu caso no tarte tanto más. Un saludo.

About RafaelM

RafaelM

Community Record

Badges