Meraki Network Stack Design

SOLVED
AbbyDoc-UK
Here to help

Meraki Network Stack Design

Hi,

 

in the attached diagram I am wondering if stacking and uplinking the stacked switches is valid configuration?

 

2022-07-11_11-52-04.jpg

 

Regards

Meraki Rocks every time!
1 ACCEPTED SOLUTION
DarrenOC
Kind of a big deal
Kind of a big deal

One point - you have a physical stack of core switches (425’s).  Are you looking at stacking your edge switches and removing the individual uplinks from each switch to the core?

 

Some will be for this some will be against. Some don’t like having larger stacks.

 

Could you dual connect each edge switch back to the core across both core switches to give you 20Gbs etherchannel per switch?  You have the capacity on your core to do so.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

4 REPLIES 4
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @AbbyDoc-UK 

 

On first glance I would say this looks like a suitable and resilient design.

 

im not sure what you mean by “unlinking” though?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

@DarrenOC  sorry, typo uplinking

Meraki Rocks every time!
DarrenOC
Kind of a big deal
Kind of a big deal

One point - you have a physical stack of core switches (425’s).  Are you looking at stacking your edge switches and removing the individual uplinks from each switch to the core?

 

Some will be for this some will be against. Some don’t like having larger stacks.

 

Could you dual connect each edge switch back to the core across both core switches to give you 20Gbs etherchannel per switch?  You have the capacity on your core to do so.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

@DarrenOC The physical stack has been removed in the new drawing and as you rightly observed, we will be using the uplinks between both switches at the core.

 

Again, you are right, we have been discussing the idea of having dual uplinks between each access switch and the core.

 

Thanks.

Meraki Rocks every time!
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.