I have a Meraki MX that is my firewall connected to a pair of MS switches doing my layer 3 routing. I have to configure a VLAN with the following for AV equipment. This traffic does not leave the VLAN.
DSCP Queue Values:
56(CS7) - Highest(8), PTPv2/timing, microsecond requirements
46(EF) - Medium High (6), Audio, in sequence
26(AF31) - High (4), Camera Video, MP4/h.264
IGMP Querier on subnet
IGMP Snooping Enabled on ports & VLAN
Fast/Immediate-Leave enabled on ports & VLAN for Camera switching
Can anyone tell me how to set this up?