Hi , We recently connected a Maraki 9300L switch against our Nexus 9000. A trunk al vlans is connected between them. Nothing is connected to Maraki yet except the Nexus and we get error messages on the Nexus. Does anyone have an idea what the problem is   error messages on nexus :  %STP-2-DISPUTE_DETECTED: Dispute detected on port Ethernet1/10 on VLAN0012.  %STP-2-DISPUTE_DETECTED: Dispute detected on port Ethernet1/11 on VLAN0013.  %STP-2-DISPUTE_DETECTED: Dispute detected on port Ethernet1/23 on VLAN0014.   show spanning tree on nexus   n9k# show spanning-tree summary Switch is in rapid-pvst mode Root bridge for: VLAN0012, VLAN0013, VLAN0014, L2 Gateway STP is disabled Port Type Default is disable Edge Port [PortFast] BPDU Guard Default is disabled Edge Port [PortFast] BPDU Filter Default is disabled Bridge Assurance is enabled Loopguard Default is disabled Pathcost method used is short STP-Lite is disabled   spanning tree on meraki 9300L switch :         thanks ... View more

Hi, recently our customer purchased a CW9162I AP , for the last week they are complaining about disconnections. An error appears when checking the log client . disconnected because the access point became unreachable I must point out that I connected a test computer under the AP and it has not been roaming for several days When checking the AP LOG  I don't see a drop, does anyone know the problem.       Thanks     ... View more

Hi , I'm trying to connect my Windows pc  to SM but I'm getting an error message. THE ACCOUNT NO LONGER EXIST I need to create a special user or the organization is enough.     Thanks    ... View more

Hi, where do I change the roaming setting ? RSSI vlaue Thanks ... View more

Hi, we recently purchased 10 units of  9300 switches , we are interested in the switches being used as the DHCP of the  for several networks , and we want the FW stay  the  DEFAULT GATEWAY for the vlans , we set everything  But we receive the MERAKI  as the DEFAULT GATEWAY and not the FW.  network 192.168.100/24 ip interface 192.168.100.253 default gateway of the interface in FW  :Does not exist but should be 192.168.100.254          Does anyone know what the problem is. Thanks    ... View more

Hi, We recently purchased cellular gateway MG51E and we want to establish a 192.168.1.1/24 network, and open a port to the address 192.168.1.100. We are trying to establish the network but there is a problem with the subnet. Does anyone know the problem or open a case. thanks     ... View more

Hi, I'm not sure this is the right forum but I'm doing a test of Black Belt - Meraki Deployment Stage 2 FY24 - Capture the Flag. Did something make the second question.  I found the answer but I get an error message.       ... View more