Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Niklas2
Niklas2
Here to help
Member since Apr 18, 2018
Sep 10 2019
Community Record
18
Posts
10
Kudos
1
Solution
Badges
Jul 22 2019
11:35 PM
Hey @SCC , you can add a new VLAN on a SOPHOS firewall too. It's not kind of a big deal. So add a new VLAN on SOPHOS, set UPLINK to your Switch and configure an access port in the created VLAN for the Camera. Greets
... View more
Apr 25 2019
10:58 PM
1 Kudo
Hey @RobinJiao , did that guide helped you? I only found a solution to connect client vpn with gui, wich worked fine.
... View more
Apr 12 2019
2:26 AM
okay i will try it and give u feedback
... View more
Apr 12 2019
2:08 AM
1 Kudo
So you want to connect via linux to your mx via client vpn? Your read the last part of the doc? Linux
Since Client VPN uses the L2TP over IPsec standard, any Linux client that properly supports this standard should suffice. Please note that newer versions of Ubuntu do not ship with a VPN client that supports L2TP/IP, and will therefore require a 3rd party VPN client that supports the protocol.
Note: The xl2tp package does not send user credentials properly to the MX when using Meraki Cloud Controller authentication, and this causes the authentication request to fail. Active Directory or RADIUS authentication can be used instead for successful authentication.
... View more
Apr 11 2019
11:53 PM
we don't have any issues with that sfps
... View more
Apr 11 2019
11:40 PM
Hey yeah it should work, we used FlexOptics SFP and worked fine. Here's a List wich SFP's are supported for wich model, if you have SFP's from Cisco with the same specs, go for it 🙂 https://meraki.cisco.com/lib/pdf/meraki_datasheet_sfp.pdf
... View more
Apr 11 2019
11:30 PM
Hey @TommyH , it is compatible but not certified yet. Greets
... View more
Apr 3 2019
12:58 AM
1 Kudo
Hey if you have it online and you can manage it via the cloud, you can assign the static ip through the dashboard near the "LAN IP" there is a pencil, there you can change it. Or you connect via Lan to the switch and go to switch.meraki.com. If you disabled the local device page in "network-wide" you have to hit the reset button and assign it.
... View more
Apr 2 2019
11:37 PM
Hey @Kamome , under traffic shaping -> SD-WAN policies you can set "Custom performance classes" and you can apply them to your VPN Traffic and set it to a WAN Interface Hope that helps. Greets
... View more
Apr 2 2019
11:32 PM
1 Kudo
Thanks for that, I cant reach the phone since i wrote the Post.. but I think thats the solution, thanks!!
... View more
Mar 26 2019
3:46 AM
Hey Guys, one of my workers changed the passcode to pattern - he forgot it. Is it possible to reset the pattern to a code and set this code from the dashboard? The device is in device owner mode. Thanks in advance.
... View more
Labels:
- Labels:
-
Android
May 24 2018
4:00 AM
Hey Community, i have a question to the network topology. I have 2 Switches, 1 Mx an 2 AP's, really small Meraki-network. The first switch is connected to the HP-Core. The MX is connected to Switch 1. Switch 2 is connected to the MX. All AP's are connected to Switch 2. But in the topology there is at first the mx, left leg: core, then switch 1 <-- thats wrong right leg: Switch 2 and 2 AP's <-- thats right How can i get this topology in the right way? Thank you
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 5715 | Apr 11 2019 11:40 PM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 4 | 52384 | |
| 2 | 50943 | |
| 1 | 8070 | |
| 1 | 8186 | |
| 1 | 4676 |
© 2024 Cisco Systems, Inc.
