Hola a todos. Haber si alguien me puede ayudar con un problema. Tengo un switch que me han traído a arreglarlo y cuando le escaneo para añadir el switch me da error como si estuviera deshabilitado. Si alguien me puede decir como puedo conectarme a el o cambiarle la ip se lo agradecería. Un saludo y gracias ... View more

We are a large consumer with Catalyst Center.   We are doing SDA-Access and SDA-Wireless. We also have Meraki Cloud from some small wireless stuff we did are remote sites.   As someone already mentioned i dont think either platform can be the manager of the other.   i think you will have to make a fundamental choice to use MD or CC for network management.   we currently are using 9300/9500 catalyst switches. we currently have two HA paired 9800 Wireless controllers. we are using 4800 Series Catalyst APs and also have 9120s.  we are using EWLC controller deployments when we do wireless at FIAB (Fabric in a Box) deployments with Catalyst Center.   Our paired 9800s only manage the APs for our Main Campus Fabric. ... View more

Great, many thanks! ... View more

This inclusion is a welcomed as I have friends in Japan that would find this beneficial. ... View more

Yeah... happening to me, as well.  IT IS NEW!  Something changed! ... View more

You can schedule a report but you get only HTML format and not CSV. Why this simple ask can't be availed! What say? ... View more

Here's a clue that a network technician is in really bad physical shape...                                                                                                                                                                                                                                                    He needs to rest after doing an SNMPwalk. ... View more

Congrats and Thanks. ... View more

It's been almost 6 years since this post was created.  How is it possible that we still can't do this?  And buying a second firewall to handle guest traffic is an embarrassing solution for an "enterprise" firewall.  If anyone from Meraki is listening, I beg you to please stop creating dashboards for CTO's and give us real features that engineers can use.  The lack of this single feature has to be the most frustrating experience.  Sorry for the rant.     ... View more

I like your creativity, but this can potentially become quite an ordeal to manage which I would want to avoid.  Just to mention a few, monitoring and zscaler, could make it a mess.   ... View more

I also have one question / issue which I'm not sure about. Setup: Firewall <--> (trunk allowed vlan 140, 141) Switch 1 MS130 (trunk all) <--> (trunk all) Coreswitch MS390 (trunk all) <--> (trunk all) Switch 2 MS130 (trunk allowed vlan 10, 140) <--> MR46   I can see the MAC address of the firewall interface in vlan 140 on Switch 1. But not on the Coreswitch or Switch 2. Seems as if the Coreswitch ignores VLAN140.   What is the right way to troubleshoot this? I just configured one port of the Coreswitch as access vlan 140 port and then vlan140 was available also on Switch 2. ... View more

If the mount is outside, you should consider looking at a Meraki outdoor AP, such as the MR76. I know they're more costly, but better peace of mind than worrying about having to replace one. ... View more

If you use WPA2-Enterprise mode authentication you could check your RADIUS server logs.  If you are using Windows NPS as your RADIUS server, filter the security log on the NPS server for Event ID 6272. ... View more

Thank you and will do! I am very impressed with the amount of resources in this forum. I will also try to provide feedback for others wherever I can! ... View more

Access Point licences are non model-specific - you could use you LIC-MR-xxx for MR36 or MR44  (or indeed CW91xx APs, managed in the Dashboard too) ... View more

this is true which we all know by now. there are however gotchas that are serious and you might not want to do this as the Cloud Monitoring Tool for Catalyst makes a scad of changes including SNMP v2c using the Community Public. This is bad, bad, bad and our pentester has ordered us to delete the line. SNMP v3 has been out for ages and is always preferred over v2c. and for gods sake why use the hackerfriendly community of Public?  Our CISO says Cisco is not a security company and that sure is one proof of it. ... View more

I FOUND THE GNOME! https://community.meraki.com/t5/Smart-Cameras/rename-camera/td-p/254157 ... View more

BerlinITGuy's suggestion worked.  Also crazy that this still hasn't been addressed by Cisco. ... View more

so, i turned off the client balancing on the radio default indoor profile.  The error code 17 went away almost completely.  The association error code 30's are still all over the place.  not sure if the 17s went away or just changed to 30s.  no user feedback yet.   ... View more

An IPsec or client VPN will always terminate on your primary WAN port. AutoVPN's can be made simultaneously on WAN1 and WAN2. However you don't have the ability to add another port to terminate VPN's separately. ... View more

Great job @MirzaDz!   Wow, @cmr, congrats to that top spot! 😎   Of course, thanks to everybody else involved here! ... View more

It’d also helpful to track down the devices involved in the conflict, identifying the MAC addresses can give you a clearer idea of what’s going on. As for the DNS setting, switching from "proxy to upstream DNS" probably won’t fix the conflict unless there’s a specific DNS-related issue. It doesn’t hurt to test, but I’d focus more on the DHCP setup and device configurations. ... View more

Just an update:   We do not have or use an MX Firewall.  We are only using the Meraki Switches and Access Points.  We have the VPN category blocked at our Firewall, but just wanted to add an extra layer of security and prevent it in the Firewall and Traffic Shaping if it was an option.   Thank you! ... View more

Hi @kYutobi ,        Thank you for the verification. I'll try to get documents and datasheet for the configuration. ... View more