I'm having the same issue.  Has there been any updates to this?  Does anyone have a workaround besides disabling MDNS?  Are there issues with disabling MDNS and can this be done via group policy?   ... View more

Since the error is intermittent, you might try this page: https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Active_Directory_Issue_Resolution_Guide and check the section "WMI Error". ... View more

Hi Spence Have you solved your issue? You can do this by removing NAT on the interface. ... View more

      Want to Have Internet failover so if Site B's Cable Modem goes down, the Internet Connection can be routed through Site A using a 1GB Point To Point Fiber L2 Connection. I've read above solution on how to accomplish this using a LAN Connection on Site A to the WAN Connection on Site B I have Qnap's on both ends that I want to Synchronize (Rsync) at night after Backups complete, but will easily be instantly capped on the 500MBps limit on the MX84 at the backup site. Would like to see if there is an alternate way to accomplish this so I can take advantage of the full 1GB link on the PTP connection using only LAN ports on the MX's. ... View more