Which is why I'm often to be found deploying it too!   🤣 ... View more

Hurray!!! 😄 Thanks a bunch @AmyReyes  and here's to many more years of Meraki fun. 😄 ... View more

"And later this year you’ll be able to manage and configure your Catalyst 9300 switches in the Meraki dashboard."   So will this be "a la MS390" where the ability to access IOS disappears and configuration is only possible via Meraki dashboard?   Or will be Catalyst 9300 management via Merkai in effect modify the IOS config with SSH into IOS remaining available (e.g. for debugging and "advanced config" not available via Meraki dashboard?)   Richard ... View more

Can someone from Meraki confirm that the policy is still that a Meraki device with a power supply will still ship with a power cord in the US? And that this also applies to redundant power supplies that are ordered separately in the US too? ... View more

set one AP to manual TX not auto and it is stable. Will be logging this with Meraki. ... View more

Here you go:   https://documentation.meraki.com/MR/Other_Topics/Frequently_Asked_Questions_regarding_Cisco_Meraki_Antennas   What are the Models of Outdoor Antennas? MA-ANT-20 Meraki 4dBi/7dBi Dual-Band Omni Antennas, set of 2 MA-ANT-21 Meraki 5 GHz MIMO 13 dBi Sector Antenna MA-ANT-23 Meraki 2.4 GHz MIMO 11dBi Sector Antenna MA-ANT-25 Meraki Dual-Band 8dBi/6.5dBi Patch Antenna, set of 2 (if using with 4x4:4 APs) MA-ANT-27 Meraki Dual-Band 9dBi/12dBi Sector Antenna, set of 2 (if using with 4x4:4 APs) AIR-ANT2513P4M-N Cisco Aironet Four-Port Dual-Band Polarization-Diverse Array Antenna (Stadiums) ... View more

No. ... View more

Please, in the link below is mandatory a one-armed concentrator to establish a EBGP connection in the  DC side? Is it not possible to establish a EBGP connection between the L3 switch and the MX?   https://documentation.meraki.com/MX-Z/Networks_and_Routing/BGP ... View more

the team was discharged, but we can not access it anymore because it asks for a username and password which we do not have and if we try to add it to a new account it tells me that it is already in use ... View more

Hi,MX64 MTBF Figures?can you help me? ... View more

I like the way you're thinking @nikiwaibel but I'm afraid the best they'll be able to do is a free trial, not a free MV32!  🙂  ... View more

I could not find any datasheets on this either when I wondered the same thing a few months ago, but I'm almost positive it is only 1Gb. I tried to connect an MS-425 using the MA-SFP-1GB-TX to an older 100mb HP Procurve switch (in a lab) and would not detect a link (no link lights on either switch). I tried 2 different MA-SFP-1GB-TX to make sure and same scenario on both. (Also tried the Cisco GLC-T with the same result) I then connected the MS-425 to both a new HP 1GB Procurve and also an MS250 and worked without any issues.         ... View more