You have to use layer2 trunk ports on the vce. On ms stp needs to be enabled on the trunkports. Vcetrunkport1-switch1-switch2-switch3-Vcetrunkport2 ... View more

@JPScolar If the client only wants the SD-WAN features, then put the main site MXs in single ended concentrator mode behind the Watchguards.  We have our datacentre MXs set up this way (with another vendor's enterprise edge firewalls).  Less disruption and works very well.  ... View more

These are probably closest to getting you the info (I use these calls to create monthly data on link usage/quality)...   https://developer.cisco.com/meraki/api-v1/#!get-organization-appliance-uplinks-usage-by-network https://developer.cisco.com/meraki/api-v1/#!get-network-appliance-uplinks-usage-history https://developer.cisco.com/meraki/api-v1/#!get-organization-devices-uplinks-loss-and-latency   But I don't recall any endpoints that return actual link speed, i.e. you can only infer up/down speed (or throughput) from usage over time.   Note that the first of these calls is early access, so you need to enable EA on the organization(s) you want to use it on.   ... View more