Yes, you can configure a hairpin rule utilizing 1:1 or 1:Many NAT on the Meraki MX gateway.   https://community.meraki.com/t5/Security-SD-WAN/HairPin-Nat-Loop-back-NAT/m-p/24268 ... View more

If you have a small number of users, consider getting Z3s and using AutoVPN.  They work ok over Starlink. ... View more

Hi @AnthonyMaddick , reach out to Meraki support to have them enable Cellular firewall rules for this network  ... View more

hi @AnthonyMaddick , wondering if you ever encountered this issue again? I have been facing similar problems - internet WAN link flapping on an FTTN connection when I use the Vigor 130. Is there any other information you can share if you managed to solve it with the V130? ... View more

You'll need to find an APN for your 4G carrier that will provide a public IP address and no firewalling.  It certainly won't be the default APN.   Google has suggest the APN is: telstra.extranet ... View more

Hi Bruce, you have hit the nail on the head. ... View more

Check out the Security Center/Event Log, and see if AMP or IPS is triggering on any of the traffic.   Check the network event log for security appliances and make sure content filtering is not triggering on the traffic.     ... View more

when I just "plug it in" I get a local IP address assigned off the DHCP server on the Teltonika 4G router. The Meraki dashboard does not show the external address only the local address. The VPN services do not work as I assume are double NAT.    ... View more