cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ECMS Practice Question - Nov 18th

SOLVED
Highlighted
Meraki Employee

ECMS Practice Question - Nov 18th

ECMS Question

 

On the Meraki Dashboard, where should you navigate to make sure your MV cameras are in the correct time zone, and change it if you need to?

 

  1. Cameras > Monitor > General
  2. Cameras > Configure > General
  3. Network-wide > Monitor > General
  4. Network-wide > Configure > General

mv.PNG

 

 

 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Meraki Employee

Re: ECMS Practice Question - Nov 18th

The correct answer is 4. Network-wide > Configure > General. That is the only option that is available for all types of networks, including Camera and combined ones as well. Option 2. Camera > Configure > General is not a valid option on combined networks.

 

I hope that helps! 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

View solution in original post

3 REPLIES 3
Highlighted
Building a reputation

Re: ECMS Practice Question - Nov 18th

Might have 2 answers here ;

 

Spoiler
Cameras > Configure > General    redirects to Network-wide > Configure > General. So 2 and 4 could be correct.

 

Highlighted
Kind of a big deal
Kind of a big deal

Re: ECMS Practice Question - Nov 18th

Beware the golf ball

Highlighted
Meraki Employee

Re: ECMS Practice Question - Nov 18th

The correct answer is 4. Network-wide > Configure > General. That is the only option that is available for all types of networks, including Camera and combined ones as well. Option 2. Camera > Configure > General is not a valid option on combined networks.

 

I hope that helps! 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

View solution in original post

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.