Hi, all,   We've configured all of our ports of our core switch (MS425-32) to be mirrored to a destination port on the same switch. The destination port has a device connected to it that is being used to capture the traffic from the source ports.   The issue that we're having is that the traffic shows the IP address of the wireless access point instead of the IP address of the client that is connected to the wireless access point.   How would I be able to achieve this? ... View more

Hi Meraki Community,   The issue I need help to resolve is getting phone paging to work across multiple floors that each have their own networks for their phones.   I have three floors with their own networks.   I want to be able to send a page from a phone that's on the second floor to phones on the third & fourth floor and vice versa. Right now, I can only do it on the same floor from the same floor. Example: Paging from a phone on the second floor only works on the second floor. The third and fourth floor does not get the page.   We have Yealink SIP-T54W phones. Voice VLANs for each floor for the phones. Multicast routing is enabled with an address of 224.0.1.75 as provided by our vendor.   Any help is appreciated!     ... View more

Hi all,   I recently received a Cisco 891F-K9 router and an MS130-8X switch. I'd like to set them up to use for a home lab to start learning.    I have Verizon as my ISP.    How would I set these up?    I'm assuming the Cisco 891F-K9 router will plug into one of the LAN ports on the Verizon router for Internet access.    Any help is appreciated!  ... View more