14 Days are more than enough to reach Tier 3! ... View more

@Inderdeep sadly the guide doesn't state anything aboutbaudio issues on the mv2. Could you reproduce the issue? ... View more

I did check it in 4.16 and there was no Audio ... View more

This competition is lacking something...   We definitely need more socks! ... View more

I've tried it with 4.16 and 4.17. I can't tell if other camera are affected. I just have 1 mv2 and a few mv72x in the network. The mv72x are having audio disabled for legal reasons. ... View more

I've installed a OpenBrowser on my chromecast and im viewing the streams with the vision.meraki.com Portal. Its working fine so far 🙂 ... View more

Based on Geofence: enable/disable specific switch ports. I've used it for Power saving purposes at home to shut down some PoE devices. auto vpn between meraki organizations: updates/creates ip, key, subnets of specific/all networks between two metaki organizations  ... View more

No problem 😃 sometimes the issues are in the smallest mistakes ^^ ... View more

I'm not sure about the response here and can't test it at the moment, but "hello" is to short for a psk. "HelloThere" did work fine for me ... View more

You are probably adding empty data from the "full" get result.   If you just want to change the SSID, then just change the SSID   json body:   {'psk': 'HelloThere'}   ... View more

I guess it's time to post here more =D ... View more

Next Step when she is older: I will add movement zones to detect, if she is standing to start the alerting routing. ... View more

You might want to look at this endpoint: /networks/{networkId}/events/eventTypes     [ { "category": "Status", "type": "carrier_event", "description": "Ethernet port carrier change" }, { "category": "Switch status", "type": "poe_budget_change", "description": "PoE budget change" }, { "category": "Switch status", "type": "psu_insert", "description": "Power supply inserted" }, { "category": "Switch status", "type": "psu_remove", "description": "Power supply removed" }, { "category": "Switch status", "type": "temp_critical", "description": "Temperature Alert" }, { "category": "Events dropped", "type": "events_dropped2", "description": "Events dropped" }, { "category": "802.1X", "type": "8021x_auth", "description": "802.1X authentication" }, { "category": "802.1X", "type": "8021x_guest_auth", "description": "802.1X guest authentication" }, { "category": "802.1X", "type": "8021x_critical_auth", "description": "802.1X critical authentication" }, { "category": "802.1X", "type": "8021x_deauth", "description": "802.1X deauthentication" }, { "category": "802.1X", "type": "8021x_client_deauth", "description": "802.1X client deauthentication" }, { "category": "802.1X", "type": "8021x_eap_success", "description": "802.1X EAP success" }, { "category": "802.1X", "type": "8021x_canned_eap_success", "description": "802.1X Canned EAP success" }, { "category": "802.1X", "type": "8021x_eap_failure", "description": "802.1X EAP failure" }, { "category": "802.1X", "type": "8021x_radius_timeout", "description": "802.1X RADIUS timeout" }, { "category": "802.1X", "type": "8021x_client_timeout", "description": "802.1X client timeout" }, { "category": "802.1X", "type": "cli_set_rad_parms", "description": "RADIUS response" }, { "category": "802.1X", "type": "cli_set_rad_okc_parms", "description": "OKC match" }, { "category": "802.1X", "type": "cli_set_rad_pmksa_parms", "description": "PMKSA cache match" }, { "category": "802.1X", "type": "8021x_server_err_msg", "description": "802.1X server error message" }, { "category": "802.1X", "type": "multi_auth_vlan_restriction", "description": "Multi-Auth VLAN Restriction" }, { "category": "Auth", "type": "splash_auth", "description": "Splash authentication" }, { "category": "Auth", "type": "ad_auth", "description": "Domain authentication" }, { "category": "Auth", "type": "ad_connect", "description": "Connected to Domain Controller" }, { "category": "Auth", "type": "ad_failure", "description": "Unable to connect to Domain Controller" }, { "category": "Auth", "type": "radius_mac_auth", "description": "RADIUS authentication" }, { "category": "Auth", "type": "radius_mab_timeout", "description": "RADIUS MAB timeout" }, { "category": "Auth", "type": "radius_mac_auth_failover", "description": "RADIUS authentication failover to Guest VLAN" }, { "category": "Auth", "type": "radius_dynamic_vlan_assignment", "description": "RADIUS dynamic VLAN assignment" }, { "category": "Auth", "type": "radius_invalid_vlan_name", "description": "RADIUS server returned an invalid VLAN name" }, { "category": "Auth", "type": "radius_server_attribute_mismatch", "description": "RADIUS authentication attribute mismatch" }, { "category": "DHCP", "type": "dhcp_lease", "description": "DHCP lease" }, { "category": "DHCP", "type": "dhcp_release", "description": "DHCP release" }, { "category": "DHCP", "type": "dhcp_nak", "description": "DHCP NAK" }, { "category": "DHCP", "type": "dhcp_problem", "description": "DHCP problem" }, { "category": "DHCP", "type": "multiple_dhcp_servers_detected", "description": "Multiple DHCP servers detected" }, { "category": "DHCP", "type": "dhcp_no_leases", "description": "No DHCP lease available" }, { "category": "DHCP", "type": "rogue_dhcp", "description": "Rogue DHCP server detected" }, { "category": "DHCP", "type": "dhcp_blocked", "description": "DHCP blocked" }, { "category": "DHCP", "type": "dai_blocked", "description": "DAI blocked" }, { "category": "Switch port", "type": "stp_port_role_change", "description": "Port STP change" }, { "category": "Switch port", "type": "stp_port_delay_monitor", "description": "STP BPDU delay monitor" }, { "category": "Switch port", "type": "stp_bpdu_guard", "description": "STP BPDU guard activated" }, { "category": "Switch port", "type": "stp_root_guard", "description": "STP root guard activated" }, { "category": "Switch port", "type": "stp_loop_guard", "description": "STP loop guard activated" }, { "category": "Switch port", "type": "cable_test_started", "description": "Cable test" }, { "category": "Switch port", "type": "port_bounce", "description": "Port bounce" }, { "category": "Switch port", "type": "sfp_insert", "description": "SFP module inserted" }, { "category": "Switch port", "type": "sfp_remove", "description": "SFP module removed" }, { "category": "Switch port", "type": "port_status", "description": "Port status change" }, { "category": "Switch port", "type": "whitelist_error", "description": "Client is not on whitelist" }, { "category": "Switch port", "type": "sticky_mac_limit", "description": "Sticky MAC whitelist limit reached" }, { "category": "Switch port", "type": "stp_bpdu_conflict", "description": "STP BPDU sender conflict" }, { "category": "Switch port", "type": "udld_alert", "description": "UDLD alert" }, { "category": "Switch Health", "type": "loop_detected", "description": "Loop detected" }, { "category": "Switch Health", "type": "mac_flap_detected", "description": "MAC address flapping" }, { "category": "Switch Health", "type": "stp_elected_root", "description": "STP root bridge elected" }, { "category": "Switch Health", "type": "stp_no_longer_root", "description": "STP root status released" }, { "category": "VRRP", "type": "vrrp", "description": "VRRP transition" }, { "category": "VRRP", "type": "vrrp_state_change", "description": "VRRP transition" }, { "category": "VRRP", "type": "vrrp_vrid_collision", "description": "Virtual router collision" }, { "category": "ECMP", "type": "ecmp_add_failure", "description": "ECMP route add failed" }, { "category": "ECMP", "type": "ecmp_removed", "description": "ECMP route removed" }, { "category": "OSPF", "type": "ospf_neighbor_init", "description": "OSPF neighbor init" }, { "category": "OSPF", "type": "ospf_neighbor_full", "description": "OSPF neighbor up" }, { "category": "OSPF", "type": "ospf_neighbor_down", "description": "OSPF neighbor down" }, { "category": "OSPF", "type": "ospf_route_iface_overlap", "description": "OSPF route interface overlap" }, { "category": "OSPF", "type": "ospf_route_overflow", "description": "OSPF route table overflow" }, { "category": "DFS", "type": "dfs_event", "description": "DFS event detected" }, { "category": "802.11", "type": "association", "description": "802.11 association" }, { "category": "802.11", "type": "disassociation", "description": "802.11 disassociation" }, { "category": "802.11", "type": "aps_association_reject", "description": "802.11 association rejected for client balancing" }, { "category": "802.11", "type": "11r_association", "description": "802.11r association" }, { "category": "802.11", "type": "11r_fast_roam", "description": "802.11r roaming reassociation" }, { "category": "WPA", "type": "wpa_auth", "description": "WPA authentication" }, { "category": "WPA", "type": "wpa_deauth", "description": "WPA deauthentication" }, { "category": "WPA", "type": "wpa_client_deauth", "description": "WPA client deauthentication" }, { "category": "IP conflict", "type": "uplink_ip6_conflict", "description": "IPv6 uplink duplicate address detection" }, { "category": "IP conflict", "type": "uplink_ip6_slaac_failover", "description": "IPv6 uplink auto configuration failover" }, { "category": "IP conflict", "type": "uplink_ip6_static_failover", "description": "IPv6 uplink static configuration failover" }, { "category": "AutoRF", "type": "noise_avoid_begin", "description": "Auto RF interference avoidance begin" }, { "category": "AutoRF", "type": "noise_avoid_end", "description": "Auto RF interference avoidance end" }, { "category": "AutoRF", "type": "channel_scan", "description": "Channel scan" }, { "category": "AutoRF", "type": "spectrum_scan_start", "description": "Spectrum analysis" }, { "category": "AutoRF", "type": "auto_rf_channel_change", "description": "Auto RF channel change" }, { "category": "AutoRF", "type": "auto_tx_power_change", "description": "Auto Tx power change" }, { "category": "AutoRF", "type": "auto_rx_sop_change", "description": "Auto Rx sop change" }, { "category": "Meraki VPN", "type": "vpn_connectivity_change", "description": "VPN tunnel connectivity change" }, { "category": "Meraki VPN", "type": "vpn_registry_change", "description": "VPN registry connectivity change" }, { "category": "L3 roaming", "type": "l3roaming_start_set_anchor", "description": "Sent anchor request to anchor AP" }, { "category": "L3 roaming", "type": "l3roaming_set_anchor_done", "description": "Received SetAnchor reply or timed out" }, { "category": "L3 roaming", "type": "l3roaming_set_anchor_success", "description": "Received anchor reply" }, { "category": "L3 roaming", "type": "l3roaming_set_anchor_fail", "description": "Anchor reply not received" }, { "category": "L3 roaming", "type": "l3roaming_assign_anchor", "description": "Assigned anchor AP to client" }, { "category": "L3 roaming", "type": "l3roaming_lost_anchor", "description": "Working anchor AP became unresponsive" }, { "category": "L3 roaming", "type": "l3roaming_assign_hosting", "description": "Received anchor request; sent reply" }, { "category": "Air Marshal", "type": "device_packet_flood", "description": "Single device packet flood" }, { "category": "Air Marshal", "type": "packet_flood", "description": "AP / client flood" }, { "category": "Air Marshal", "type": "bcast_deauth", "description": "Broadcasted deauthorizations" }, { "category": "Air Marshal", "type": "mac_spoofing_attack", "description": "AP spoof" }, { "category": "Air Marshal", "type": "bcast_deauth_attack", "description": "Under containment" }, { "category": "Air Marshal", "type": "bcast_disassoc_attack", "description": "Under containment" }, { "category": "Air Marshal", "type": "bcast_disassoc", "description": "Broadcasted disassociations" }, { "category": "Air Marshal", "type": "rogue_ap_association", "description": "Rogue AP association" }, { "category": "Adaptive Policy", "type": "adaptive_policy_state_change", "description": "Adaptive Policy state change" }, { "category": "Appliance status", "type": "failover_event", "description": "Primary uplink status change" }, { "category": "Client status", "type": "client_connectivity", "description": "Client connectivity status change" }, { "category": "IP conflict", "type": "ip_conflict", "description": "Client IP conflict" }, { "category": "IP conflict", "type": "ip6_conflict", "description": "IPv6 duplicate address detection" }, { "category": "IP conflict", "type": "martian_vlan", "description": "Source IP and/or VLAN mismatch" }, { "category": "IP conflict", "type": "martian_src", "description": "Internet martian" }, { "category": "Non-Meraki / Client VPN", "type": "vpn", "description": "Non-Meraki / Client VPN negotiation" }, { "category": "Non-Meraki / Client VPN", "type": "client_vpn_connect", "description": "VPN client connected" }, { "category": "Non-Meraki / Client VPN", "type": "client_vpn_disconnect", "description": "VPN client disconnected" }, { "category": "Non-Meraki / Client VPN", "type": "client_vpn_address_pool_empty", "description": "VPN client address pool empty" }, { "category": "Cellular", "type": "cellular_up", "description": "Cellular connection up" }, { "category": "Cellular", "type": "cellular_down", "description": "Cellular connection down" }, { "category": "Web caching", "type": "web_cache_stopped", "description": "Web cache stopped" }, { "category": "Web caching", "type": "web_cache_started", "description": "Web cache started" }, { "category": "Route tracking", "type": "route_connection_change", "description": "Route connection change" }, { "category": "Route tracking", "type": "network_test", "description": "Network test" }, { "category": "BGP", "type": "bgp_received_notification", "description": "BGP received notification" }, { "category": "BGP", "type": "bgp_sent_notification", "description": "BGP sent notification" }, { "category": "BGP", "type": "bgp_session_established", "description": "BGP session established" }, { "category": "BGP", "type": "bgp_session_unestablished", "description": "BGP session no longer established" }, { "category": "Filtering", "type": "cf_block", "description": "Content filtering blocked URL" }, { "category": "Filtering", "type": "sf_url_block", "description": "Security blocked URL" }, { "category": "Filtering", "type": "sf_binary_block", "description": "Security blocked file" }, { "category": "Filtering", "type": "nbar_block", "description": "NBAR blocked" }, { "category": "Intrusion Detection", "type": "ids_start", "description": "Intrusion detection started" }, { "category": "Intrusion Detection", "type": "ids_error", "description": "Intrusion detection error" }, { "category": "Intrusion Detection", "type": "ids_update", "description": "Intrusion detection rules update" } ]   ... View more

@John_on_APIcan you push this internally a little bit more? The case is still open and the last update was from today:   I'm afraid there haven't been any further updates from our engineering team on this one. I appreciate this has been open some time, hopefully they will resolve this soon. ... View more

Is anyone else expiering performance issues as soon as you are on dual stack?     I didn't run a packet capture yet, but when I'm opening e.g. Google it is working fine ->, search takes ages. Ads on mobile games are not working at all(so something good 😂)   As soon as I disable ipv6 in that vlan, everything is working fine again. ... View more

Go to your organzation in the dashboard.   Then under help -> api docs you will find all enabled endpoints for your organization.   There is also a webex bot which will post all updates on the api. There is a topic in the early access forum about that. ... View more

Congrats!   People write congrats because they can't spell congrajlashins. ... View more

Thats the "offline" Storage. The MT will log the data in the internal storage in the case of network/internet/dashboard outage. After the outage it will upload the internal data to the dashboard.   changing the sampling rate: probably just over a support case. At least I don't know any way. ... View more

how about removing the devices first from the old network and then add them to the new network?   1) get the orgnaization networks 2) remove device(s) from the network 3) create new network 4) add device to the new network 5) remove old network 6) configure all needed parameters ... View more

There is no EOL yet published/announced ... View more

Is this offering staying forever or will they be removed in e.g. 5 years from the existing orgs ? ... View more

You need the Dashboard API for your needs. There are several REST calls for your requirements. Depending on the software you are using in the backend: There is also a python module which makes these calls a little bit easier. ... View more