And one very important point as shown in that slide is that to start it will be for concentrator mode only deployments. ... View more

@MuhammadHasan in addition to the link @alemabrahao provided I also have a slide deck that walks through some examples of Camera and Sensor roles using SAML with my IdP. Sharing the link below in case it's helpful to you.   Link to deck ... View more

You just did 😛 ... View more

Beyond what the schema shows "The severity of the channel planning activity that occured (1 = most severe, 6 = least severe)" I'm not finding any further definition. ... View more

Upgraded my MX95. No issues to report so far. ... View more

I just created a new SM test network and the Get Org Networks endpoint returns the network ID for me.   https://api.meraki.com/api/v1/organizations/<my ORG ID>/networks ... View more

@junior_palomo The NAT exceptions feature was added back to the early access program page yesterday (May 28, 2024). ... View more

The camera should still show motion events on the timeline after 3 days with MBR enabled, but unless the motion occurs with the area of interest it shouldn't be saved.   Example from my MV52. Area of interest does not include main road into the neighborhood.     The last 3 days of video are saved, anything older is only saved when motion occurs in the area of interest.     While motion occurs on the street it's outside the area of interest and not saved. The motion thumbnail is hosted in AWS, not on the camera (you can right click on them and see the link).   ... View more

No specific guidance that I've seen. But to be safe with this setup you could just schedule the firmware jobs for different times. So, for example if there's new firmware for the MR, MS, MVs update the Cameras first, then the Switch, then the AP. Keeping in mind that will of course cause two reboots of the AP (two outages for the remote building). ... View more

Yes, that will work fine. I would first boot all that gear up in a lab so the devices can update to the latest firmware and grab their configs. But it's not mandatory.  ... View more

@YoeriOppelaar1 You can set the bluetooth scanning mode with this endpoint https://developer.cisco.com/meraki/api-v1/update-network-wireless-bluetooth-settings/   I don't believe there are endpoints yet for the more advanced parts of MR MQTT settings. ... View more

Pretty sure nothing has changed. I still don't see build strings for any legacy platform. I also tested by setting a 28.5.1 network to r31 and the AP did nothing at all as expected. ... View more

As everyone else stated you just need to add the license now. Yes, the best option is to always just claim the order number as it imports the serials and license key.   But even if you just claim serials and it causes a license compliance issue dashboard will start a 30 day grace period for you. That way you have up to 30 days to claim the license key and get back into compliance.   So, as long as you can get the license key from your reseller in a reasonable amount of time you don't need to unclaim any serials. ... View more

I'll test my template bound network now. I got the Sensor up webhook. I'll see in an hour if I get the down alert.   Update - I got an email and webhook for the sensor being down after an hour for my template bound network ... View more

From what I can tell in this current beta there's simply no build string for the older APs. So, upgrading a network should just not do anything to those older APs. Perhaps in future beta versions it will assign the most current supported version(s) as most firmware releases do as you mentioned. ... View more

Cisco Meraki is changing the default behavior of the NAT Exceptions with Manual Inbound Firewall feature to better align with expectations of feature functionality. As a result, we removed this feature from Early Access for a short time while we make these changes. Once it is turned back on, the user experience will be more intuitive ... View more

It has been removed from the EAP page due to issues. It should return soon once resolved. ... View more

Here's an example of what I mean https://docs.google.com/presentation/d/1pMqZk4PKk5VYOqPQqj0-WoYb3cVDjPmzCVfYYBBPBCs/edit?usp=sharing   Also, if these are downstream firewalls with public IPs perhaps you can just connect them to the provider edge equipment instead of being behind the MX? ... View more

Create a VLAN on the MX using the /29 subnet.   Then use the 1:1 NAT section and enter the public IP in both the Public and LAN IP sections.     There are several past threads on the topic as well. Example, this one. ... View more

@gdgudmundson I pulled the battery from a MT20 this morning and got the webhook alert 1 hr later ... View more