I've been making use of the Organization Security Events in Dashboard API v0.  This is the same information presented in the Dashboard under: Organization -> Security Center -> MX Events.   I'm having an issue with this script and thought, while this can of worms is open, why not migrate to API v1.  The problem is that I cannot seem to find an equivalent to the Security Events in v1.  I can find Network-level events, same as in v0, but nothing under Organization for security events.  I thought maybe security events were lumped into the network-level events, but that doesn't seem to be the case, either.   Am I missing it?  I've browsed and searched through Postman for "security" and not finding a match.   Thanks in advance for taking the time to read this. ... View more

We have an HQ site with an MX100.  We are using a number of Content Filtering blocked website categories.  Today, one of our users at the HQ site complained about a website that was blocked by Meraki.  He sent a screenshot that proves Meraki blocked it.   Another of our workers, at home using a Z3 gateway, was able to bring up that very same website.  The Z3 gateway doesn't have built-in Content Filtering, but we do have the Z3 on full-tunnel.  What I mean is, on the Site-to-Site VPN settings, the HQ MX100 is the default route.  I had assumed that putting the Z3 in full tunnel mode would mean that the Content Filtering and Threat Protection capabilities of the MX100 at our HQ site would be leveraged to protect the remote worker on the Z3 gateway.  Did I make a faulty assumption?   Thanks for anyone that can help me understand how both Content Filtering and Threat Protection apply in this case. ... View more

Hello all.  I'm trialing some Z3 appliances.  My Z3 has a default VLAN (192.168.50.1) and VLAN2 for voice (172.16.50.1).   When I first setup the Z3, I didn't have the voice VLAN created.  And when I setup a wireless SSID with RADIUS authentication, it worked great.  But since adding the 2nd VLAN, my laptop will not connect to this same SSID.   I was poking around my RADIUS server, and I found System Events like this: A RADIUS message was received from the invalid RADIUS client IP address 172.16.50.1.   So, for reasons that I haven't been able to determine, the RADIUS requests from the Z3 are going to my RADIUS server with a source IP = 172.16.50.1 (Voice VLAN) when they should be going out with source IP = 192.168.50.1.   On my SSID, the VLAN Assignment = Default (1).  I can't think what other setting that I need to look for to correct this.  But yet I feel like I'm missing something really simple.   Anyone else have experience with RADIUS and multiple VLAN on the Z3?   Thanks, much. ... View more

I have an automated task that should have rebooted 3 of our MX64 appliances last night.  The API was unable to perform the reboot it seems.  I didn't check the logs from my automated script, but I did go into the Dashboard to manually restart the devices.  I received an error when doing so:   Malformed request       I've tried maybe 6 different MX64 and MX67 appliances from the dashboard, all with the same error and they do not reboot.   If you are curious why we restart the MX at all, it is because the Cellular modem in the USB port disappears from the list of interfaces.  Using the API, an automated script determines the problem and if it is after-hours, reboots the MX.  Upon reboot, the USB modem is visible once again.  The problem with rebooting MX occurs for devices with and without a USB modem and an MX67C with the internal cell modem.   My search for "malformed request" in the community had a lot of hits because of the word "request", but I didn't come across "malformed request".  So I don't know what to do.   thanks. ... View more