Meraki

Bettencourt · ‎Apr 8 2023

Thanks @RaphaelL I'll flag this internally.

Bettencourt · ‎Apr 8 2023

Bem-vindo César.

Bettencourt · ‎Nov 23 2022

Maligayang pagdating, There is a lot of information sharing by our community and we're always looking for exciting challenges. Welcome to the cloud.

Bettencourt · ‎Sep 10 2022

You can retrieve the static routes via API, not the entire route table, at least now for now, there is no information if this will be possible or when. You should submit your feedback to Meraki by clicking the Give your feedback button on the bottom right of every dashboard page.

Bettencourt · ‎Aug 29 2022

You are not missing anything in the dashboard. From a very raw perspective, and not taking into account MDM solutions, roamings, etc, joining an SSID is always a client-device decision, APs do not have a mechanism to force any device to join a particular SSID, which would be extremely problematic from a security standpoint. If your device is not auto joining an SSID, and only does it when you manually select the SSID, I would highly suggest that you reach out to the device vendor for support and to look into Google support forums as this is not something that is configurable in the dashboard.

Bettencourt · ‎Jul 10 2022

You would see a pie under Network-wide > Clients then at the top where it says Applications click the arrow to the right or left to change the pie type.

Bettencourt · ‎Jul 10 2022

Greetings, There are two ways to approach this issue. 1. You can configure a slice with an IP Range skipping the RFC1918 addresses https://documentation.meraki.com/MR/Monitoring_and_Reporting/Hostname_Visibility 2. You can use a Netflow collector and then in your preferred collector, filter traffic as you wish https://documentation.meraki.com/MX/Monitoring_and_Reporting/NetFlow_Overview Keep in mind that both solutions will start collecting data after being configured, and you should not expect to see historical traffic.

Bettencourt · ‎Jun 23 2022

Se o equipamento estiver sido reposto com as configurações padrāo ele irá correr DHCP, caso contrário configura o teu PC com um IP na mesma rede do MX e depois digita o IP do teu MX no browser.

Bettencourt · ‎Jun 23 2022

Se o modelo do teu MX tiver uma porta management, podes utilizar essa porta, excepto MX84, se nāo tiver porta management podes entāo utilizar qualquer porta LAN. https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page

Bettencourt · ‎Jun 22 2022

Ughhhhh.. meant after the ACK is sent by the server, not the client.

Bettencourt · ‎Jun 21 2022

It appears to be a feature request, please login to your dashboard and click the "Give your feedback" button on the bottom right of every page. snmpwalk -v2c -t 10 -c xxx -Ob -M +. -m +MERAKI-CLOUD-CONTROLLER-MIB snmp.meraki.com:16100 .1.3.6.1.2.1.4.22.1 IP-MIB::ipNetToMediaEntry = No Such Object available on this agent at this OID snmpwalk -v2c -t 10 -c meraki 192.168.128.2:161 .1.3.6.1.2.1.4.22.1 .1.3.6.1.2.1.4.22.1 : Unknown Object Identifier (Sub-id not found: ipNetToMediaTable -> 1 )

Bettencourt · ‎Jun 19 2022

If you no longer have physical access to the device and need to remove the agent, remote commands similar to the following may be used. Please note you are deleting files and executing commands at your risk. launchctl unload /Library/LaunchDaemons/com.meraki.agentd.plist rm -f /Library/Application Support/Meraki/m_agent /Library/Application Support/Meraki/m_agent_upgrade rm -rf '/Library/Application Support/Meraki/' rm -f /Library/LaunchDaemons/com.meraki.agentd.plist or launchctl unload /Library/LaunchDaemons/com.meraki.agentd.plist && rm -f /Library/LaunchDaemons/com.meraki.agentd.plist && rm -rf "/Library/Application Support/Meraki/" && rm -rf “/usr/local/sbin/Meraki/“ && rm -f /usr/local/sbin/m_agent*

Bettencourt · ‎Jun 18 2022

Check out https://documentation.meraki.com/SM/Device_Enrollment/Uninstalling_Systems_Manager_and_Removing_Managed_Devices#macOS

Bettencourt · ‎Jun 18 2022

Hello mkane, I have so many questions, it must have been an exceptional experience to work with such brilliant people, I'm sure you must have some incredible stories to share. Glad to have another Meraki veteran on board, I'll see you around in the cloud side!

Bettencourt · ‎Jun 14 2022

Welcome Berlin, of course you're lucky, you can manage an entire network infrastructure from your desk, with no requirement for on-site visits to do the day-to-day duties! But if you want to be extra lucky, just continue participating in the community giveaways and contests, then you can get some sweet swag, if you get extra you can send it by post to me 😄

Bettencourt · ‎Jun 14 2022

Welcome to the community space, we're glad to have you here, 5 years using Meraki you must have run into some interesting projects I bet, thanks for joining us.

Bettencourt · ‎Jun 14 2022

I can confirm that feedback submitted via Firefox is received from the dashboard. I have run a test using the newest version of Firefox and I received the confirmation message on both current and future UI. Therefore you must have a local issue, try the usual, clearing cache, cookies, trying in incognito mode, disable extensions 1 by 1 to see if any are interfering with the process, and possibly reinstall the browser if needed? Best wishes ✌️

Bettencourt · ‎Jun 11 2022

That is awesome, I love these projects, it really brings the creativity out and ingenuity out of a person, keep sharing, and you might need to add a Meraki MT10 Sensor in there for "completion" 😅 https://meraki.cisco.com/product/sensors/indoor-sensors/mt10/

Bettencourt · ‎May 31 2022

Hello, There isn't a way to disable 2FA for certain accounts if it is being enforced globally.

Bettencourt · ‎May 13 2022

If you run a packet capture on the wired interface of the AP on which the client is connected, do you see the full DORA exchange as a client tries to associate with the network? It's been a while since my windows days, I assume it should only populate the lease table after the Ack back from the endpoint? On the client itself, do you see the entire IP assignment configured as expected, IP, mask, gateway, VLAN? Does the communication only not work if going towards the internet? Are you able to ping the gateway? Could you have some L3 block, possibly a missing return route upstream of the MS? Are the wired clients on the same VLAN as the wireless clients?

Bettencourt · ‎Apr 22 2022

Happy Earth Day 2022, let there be ice. I use IOT devices and Apple Home Kit to efficiently control my environment.

Bettencourt · ‎Oct 26 2021

You will need to go each Firewall & traffic shaping > Traffic shaping rules > Per-SSID bandwidth limit. Alternatively, you can bind your existing networks to a template and do it all in one go. https://documentation.meraki.com/General_Administration/Templates_and_Config_Sync/Managing_Multiple_Networks_with_Configuration_Templates

Bettencourt · ‎Oct 22 2021

If your dashboard is based in Europe, you can forge a client by going to Network-wide > Clients, tick a client's box, and click the Forget button on the top left. You can also pre-configure a client and give it a custom name: https://documentation.meraki.com/MX/Group_Policies_and_Block_Lists/Pre-configure_Network_Policy_for_Client_Devices

Bettencourt · ‎Aug 21 2021

Hello, The only way to achieve this would be to move those two APs to a separate network and disable all the alerts. However, I personally do think that adding tags to the alerts page is an awesome idea, do use the Make A Wish button to suggest that feature to Cisco Meraki. If you want to know more about Alerts, you can consult this guide: https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Alerts_and_Notifications Have a good weekend!

Bettencourt · ‎Aug 8 2021

The users will disconnect from the WiFi for a brief second and automatically reconnect back. They should not be prompted to enter their passwords, assuming they saved the password in their device OS.

About Bettencourt

Bettencourt

Community Record

Badges