To fix wifi calling issue over Guest wifi I did the following Allow UDP port 500 and 4500 in firewall and traffic shaping Local Lan is still disabled, but wifi calling is still working We are using External DHCP server assigned instead of NAT To test the wifi calling I turned on airplane mode and turned on Guest wifi. I was able to make calls successfully AP MR42 ... View more

Hi @CptnCrnch, Regarding your comment on Umbrella Statistics, I want to be clear in that regardless of which model you go with "Manual, vs Automatic", that neither will allow dashboard to display statistics?  You also stated that the automatic integration does not have an umbrella account and everything is in the Meraki Dashboard, so there is only configuration options for DNS and the predefined policies, no statistics or logging of event of any kind? I just want to be clear. ... View more

Ok, aquí vamos de nuevo!!!, Here we go Again!!! ... View more

No, I haven't. But then again, I haven't noticed it lately, as things have gotten upgraded since (MBP, iPhone, Meraki).   But in my scenario it was on an SSID with PSK. I haven't noticed it on a wireless network with 802.1x. ... View more

>In fact I have an ONT (fibre to ethernet)   That is not a good sign.  Your ISP specified LLC encapsulation - which can't be used on an ONT with an Ethernet presentation.   Hopefully, your ISP has just given you the wrong information, otherwise, they may have mis-provisioned the circuit.   Actually, it doesn't make you confident about them provisioning the IPv6 side correctly. ... View more

I still had an issues WiFi  Performance hop from 2 to 3 dots on my iOS and Mac devices on one of my AP.  Also roaming between 2 AP working not as expected. I use 802.11r adaptive since most of my devices came from Apple. I disable client balancing and relay on 802.11r and 802.11v but I don’t see 802.11k. I use wpa2 enterprise network with Cisco Cloud authentication and since half year I see lots of disconnections. Only option is to disable and enable WiFi on clients.  unfortunately Meraki support still can’t resolve this  issue. My devices are 2 MR33, mx67 an ms 220 8 port when I using Ruckus or Extreme Network AP I don’t see this kind of problems  PS. Why Meraki Cloud don’t support WPA3 Enterprise? ... View more

Hello,   thanks for the very informative reply!   Yes my question was answered thank you. My questions were more theory based, I work for a service provider who has a variety of clients (hospitals, retail, agriculture etc) so there is a fine balancing act between security and functionality.    In my case (lab setup) the answer was to switch to bridge mode and use layer 3 and DHCP on the MX which is working well.   regards       ... View more

Hey @smccloud1 I don't believe this is a Meraki bug, and I would look into issues with your RADIUS server.   1. I would take a look at your RADIUS server and see what authentication type you are using. Most likely it's a mismatch on the EAP method being used. There are two EAP methods, inner and outer, and the iOS devices don't always use the same methods as other devices.   2. There are several Meraki settings that could impact you. 802.11r, 11w, and several RADIUS settings that are hidden. Give Meraki tech support a call and have a packet capture of your 802.1X authentication ready for them. ... View more

I'm following closely! We see these gaps also (mainly reported because video streaming is popular at the moment) but Wifi coverage is very flexible at this customer, so no business affected ..   Will love to hear what engineering has to say (and how they will discover what's wrong) .. ... View more

So i suggest using fibre instead of copper between the farest locations 🙂 ... View more