In fact I have an ONT (fibre to ethernet) My setup looks like that. But I move already to mx beta forum. ... View more

But 25.13 is quite old. It’s disappointing the wpa3 it’s also not working properly. On older firmware I also don’t have this issues. Besides on Aruba or Extreme Networks I didn’t notice that kind of problems. ... View more

I have a similar problem. I use several iPhones, an iPad and 2 MacBooks. For several months now the iPhones, iPad and sometimes the Mac's have been losing connection to the Wifi network. On the device it shows as active, but you can neither ping the device nor does the device have an internet connection. The only thing that helps is turning the WiFI off and on. In the Dashboard, this is visible under WLAN in the Health tab as a failure. The attached screenshot shows what this looks like. Unfortunately Meraki support is unable to deal with this. The only advice I got was to change the encryption from WPA3 to WPA2. I additionally use 802.11r adaptive as well. ... View more

I still had an issues WiFi  Performance hop from 2 to 3 dots on my iOS and Mac devices on one of my AP.  Also roaming between 2 AP working not as expected. I use 802.11r adaptive since most of my devices came from Apple. I disable client balancing and relay on 802.11r and 802.11v but I don’t see 802.11k. I use wpa2 enterprise network with Cisco Cloud authentication and since half year I see lots of disconnections. Only option is to disable and enable WiFi on clients.  unfortunately Meraki support still can’t resolve this  issue. My devices are 2 MR33, mx67 an ms 220 8 port when I using Ruckus or Extreme Network AP I don’t see this kind of problems  PS. Why Meraki Cloud don’t support WPA3 Enterprise? ... View more

Manual API Integration gives many more options, and i can see almost everything in Umbrella Dashboard. Besides i can still using roaming clients. Automated integration is best if you need to deploy network in few moments, especially for small networks for cafe, libraries and others without IT support. ... View more

I only had some issues with 2,4 clients like wireless printers and Apple Watch which ask me about the password few times. But after few days ago now its working fine. Maybe beacause i have many networks around my location, so its interferences in 2,4 GHz. On 5 GHz i didn't notice any issues. ... View more

for guest i use meraki DHCP with Facebook login which i think it's best option especially for easy to use to customers 🙂  ... View more

So i suggest using fibre instead of copper between the farest locations 🙂 ... View more

I even use Ubiquti USG as radius server and its working fine.  ... View more

For 1 GB Cat5e is enough 🙂 Cat 6A and higher is best for storage like Avid Nexis where you need high throughput. You don't get any benefits from using cables with higher category. ... View more

I work from home, but the camera could be placed in kids room, so we can monitoring they behaviour 🙂  ... View more

My router is set to upnp, but I can control the traffic. Earlier last year I did notice such an issue, so it’s not a problem with router I think. Besides I setup on all my iPhones FastLane profile through MDM to ensure the voice and video has always highest priority. I don’t use Meraki router I use instead UniFi router. ... View more

I had the same problem. I monitor port 4500 and packets flows and then suddenly i get disconnected. Sometimes i cant even place a call over Wi-Fi Calling. I contacted Meraki support but still no luck. My friend who is employed at Orange told me, the issues was at terminal side. I now trying for a 2 days Ruckus R310 and it seems less disconnection. Maybe it’s something is blocked at Meraki AP? ... View more