We have over 200 AppleTVs in our campus. I disable Bonjour to block AppleTV broadcasting over network. Clients will be able to find the nearby AppleTV via Bluetooth.  ... View more

With  version 28.5 everything runs fine in our networks (running with MR42, MR52, MR46, MR44 ...) ... View more

Does this Script still work?  I have tried using it, it shows "Imported" but doesn't actually change the name in the meraki dashboard for the device     ... View more

Predates 10.x?  I never had the issue until going to 11.x.  I'm still holding at 10.45 and it's working great in my environment, including on the stack running L3.  However, I think at some point there will be a cost in staying on 10.45  in terms of losing access to new features.   One thing I've considered is moving L3 to the firewall - vendor P likes to tell their customers "we can do that".   Or just buying a core switch stack from another vendor, and not catalysts either.   I don't understand why they can't get it together on this issue.  It's been at least 5 months since this thread started.  This issue should have been fixed in days or even hours. ... View more

My plan is to do a few networks one at a time to move towards 26.6 and see what happens. ... View more

I don't seem to have that button in my dashboard.  Just the Policy drop down box. ... View more

Just wondering, do you have "client balancing" enabled?   This can be found on the rf profile.   On event logs, look for rejected due to load balance or something like that, let us know what happens with the new ap ... View more

Thanks everyone.. I tore my network down to a single vlan (1), and then established a single vlan flat network. Once everything came online successfully, I changed vlan 1 on the MX to vlan 10, changing the trunk to my MS to native vlan 10, and native vlan 10 on the trunk going to my MR. All lan ip's set to DHCP and left the vlan box empty. Went in the MS settings and overrode the management vlan to 10. I gave it 10 minutes and came back and was successfully migrated off of vlan 1 completely. I then build out vlans for Data, IOT and Wireless clients, pulling all my devices off of the Management vlan. I then used wireless vlan tagging allowing IOT and Wireless, and forced all my devices onto the appropriate vlans by using group policy's. The home SSID is bridge mode with vlan tagging.  Finally got this right.  Cheers! @GIdenJoe @chuyendang @Roger_Beurskens @BlakeRichardson  ... View more

>may be slow to upgrade   Assuming you have a decent Internet circuit for downloading the firmware, and the MESH repeaters have a decent connection to the wired node, I would think 20 minutes should be enough. ... View more

You could use a CDN (like Amazon CloudFront) and an Amazon S3 bucket to host the source files.  Cheap.  Fast.  Easy. ... View more

👏🏽👍🏽 ... View more

We have got all user ports untrusted even with MR accesspoints. No issues up to now (with MS10.45, MS11.22 and MR25.13 softwared networks/devices). Only the uplink-ports are trusted.  ... View more

By the way, check out this post about applying Group Policies and changing names. It only seems to apply to Wireless clients.   https://community.meraki.com/t5/Dashboard-Administration/Update-Client-Name-using-API/td-p/41755 ... View more

No but you can get the last seen time (epoch/unix time) from the client details:   GET Return the client associated with the given identifier {{baseUrl}}/networks/{{networkId}}/clients/{{clientMac}}   { "id": "k1af98e", "mac": "8c:85:90:aa:aa:aa", "ip": "192.168.0.113", "ip6": "", "description": "Miles-MacBook-Pro", "firstSeen": 1520683433, "lastSeen": 1527370304, "manufacturer": "Apple", "os": "Mac OS X 10.13", "user": null, "vlan": "1", "ssid": "viaPostman", "wirelessCapabilities": "802.11ac - 2.4 and 5 GHz", "smInstalled": false, "recentDeviceMac": "88:15:44:bb:bb:bb", "clientVpnConnections": null, "lldp": null, "cdp": null }   ... View more

Of course, that is definitely allowed. Most switches support the third party compatibility. ... View more