Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About route_map
route_map
Building a reputation
Member since Oct 4, 2017
Mar 11 2021
Kudos given to
Community Record
94
Posts
45
Kudos
1
Solution
Badges
Mar 17 2020
6:40 AM
my MX at home and the MX at work are in two different orgs and it works just fine using non-meraki VPN Only bummer is that i need to change the IP manually of my home device
... View more
Mar 17 2020
3:27 AM
I have a home MX64 directly connect to my provider via PPPoE And i have a s2s vpn to the MX65 at the office Only issue with my home router/mx as you say, the IP is dynamic, meaning i have to manually change it every few days when it has changed. Otherwise everything else work just the same
... View more
Feb 19 2020
6:05 AM
just checking to see if Meraki MX's support the following features Support traffice filtering by IP host add/range and deep packet inspection at wire speed? Manageable via SNMPv3, supports snmp trap messages Support 802.1q The firewall shall support syslog protocol for reporting events? Continue to log events while under attack (DOS, DDOS, etc) THe FW should support DNS functionality for local host that resolves uo to a public DNS
... View more
Feb 6 2020
11:07 PM
Hi Can someone assist me with documentation that can give me a rough estimate of the maximum distance the MR84 with MA-ANT-27 antenna can support. And can you suggest a stronger Meraki AP, no generic or other brands I would like to Mesh different sites using the MR84's
... View more
Jan 29 2020
12:11 AM
can somehow explain the below, i cannot get my client (windows 10) to connect
... View more
Jan 27 2020
6:08 AM
Hi There is not firewall on the server blocking there is no other firewall between mx and server there is no proxy server settings configured below rules
... View more
Jan 27 2020
5:24 AM
Where can i find a documents which explains which routing protocols are supported and what features are supported and not supported. I see OSPF is support and BGP for AutoVPNs I take it EIGRP is not supported
... View more
Jan 26 2020
2:58 AM
Hi Guys So i have a home MX 64 and a Work MX65 setup for S2S vpn i eventually got my s2s vpn to work. so at work i have Eve-NG running my labs address is 192.168.20.210 so i can ping this address from my home network but i cannot http to it, not sure why. when i am in the office i can easily access 192.168.20.210, any ideas?
... View more
Jan 22 2020
11:01 PM
3 Kudos
I use purple wifi togeth with Meraki as my guest portal, very easy to use and very customizable. And you get a free license if you have less than 5 AP's. or the 7 day trial for more. try it out you wont be disapointed https://purple.ai/
... View more
Jan 16 2020
7:19 AM
I had this issue with my MX64, event after i tried to reset it wouldnt work, just loop all day long. I had to log a case for support to reset it on their side
... View more
Jan 16 2020
7:15 AM
1 Kudo
what happens when you do a traceroute
... View more
Jan 16 2020
7:09 AM
1 Kudo
Under traffic analytics it only show you application to destination. Only way i can see this happening is via packet capture
... View more
Jan 15 2020
10:16 PM
4 Kudos
one day i will be up there, have a great 2020 everyone
... View more
Jan 9 2020
2:49 AM
just an update, I havent changed anything since we last conversated. The s2s vpn established randomly for a few hours and then drops again, I have no clue what is happening at the moment
... View more
Jan 9 2020
2:48 AM
finaly get my s2s vpn working from the office to my house. I have a MX64 at home and a MX65 at the office. I want my home IP phone to register to the office CUCM so i can work from home 🙂
... View more
Dec 23 2019
11:48 PM
So the exact configuration worked at home, before the ISP swap? Yes To confirm MX65 and 64 are currently in different Orgs? yes i have looked at the troubleshooting docs and nothing there 😞
... View more
Dec 23 2019
11:46 PM
i go to tools on both MX’s I ping the public IP just fine on both side
... View more
Dec 23 2019
6:02 AM
I meant nothing has changed on the office side only change is at home. and i have updated the public ip of the home network on the office MX Have you tried a packet capture on both ends to see what comes in on both ends? no, i will try this and see Is the office MX behind a firewall? no, as mentioned before nothing has changed this side The new home provider could be blocking UDP 500 & 4500 connections. they just came back to me they are not blocking any ports
... View more
Dec 23 2019
5:07 AM
the below are from the work MX, not blocking UDP 500 or 4500 as this used to work and nothing has changed this side Dec 23 13:03:50 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. a9facc1aed498e23:41588bf9c5010c8e Dec 23 13:03:00 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 196.*.*.242[500]<=>102.*.*.107[500] the below is from the home mx, i get the public IP over PPPoE connection Dec 23 13:03:49 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. a9facc1aed498e23:41588bf9c5010c8e Dec 23 13:02:59 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 4b91c4ff5ee2ab8c:0ec81cd8388673d4 Dec 23 13:02:04 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 54e925e7dae2611b:3f1973c0fb40bdb8 Dec 23 13:00:55 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed. Dec 23 13:00:55 Non-Meraki / Client VPN negotiation msg: failed to pre-process ph1 packet (side: 1, status 1). Dec 23 13:00:55 Non-Meraki / Client VPN negotiation msg: failed to get valid proposal. Dec 23 13:00:55 Non-Meraki / Client VPN negotiation msg: no suitable proposal found.
... View more
Dec 23 2019
1:52 AM
Hi I have a MX65 at the office and a MX64 at home, site-to-site vpn used to work. in different organizations I recently changed my ISP and dont have access to their "home wifi" router so i plug direcly to the MX64 from the Fibre box, i setup the pppoe and everthing is fine and i can get to the internet with no issues. but when i want to setup s2s vpn it doesnt work, event log below Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 33739c79299d2b0b:978e8ab8006fc8f0 Dec 23 11:40:59 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 102.*.*.107[500]<=>196.*.*.242[500] Dec 23 11:40:55 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 5573bbe361 Dec 23 11:40:05 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 102.*.*.107[500]<=>196.*.*.242[500] Dec 23 11:40:01 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 2194da0f05a Dec 23 11:39:11 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 102.*.*.107[500]<=>196.*.*.242[500] Dec 23 11:39:08 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 9f489072a1d2 Dec 23 11:38:17 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 102.*.*.107[500]<=>196.*.*.242[500] Dec 23 11:38:13 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. f562d56a8af Dec 23 11:37:23 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 102.*.*.107[500]<=>196.*.*.242[500] Dec 23 11:37:19 Non-Meraki / Client VPN negotiation msg: phase1 negotiation failed due to time up. 89841dc7d01b Dec 23 11:36:29 Non-Meraki / Client VPN negotiation msg: initiate new phase 1 negotiation: 102.*.*.107[500]<=>196.*.*.242[500]
... View more
Nov 5 2019
10:24 PM
I had the same issue before, check if there is no upstream device doing natting? For me it was our dlink router doing the natting, so i had to make a change on the DLink router and it worked
... View more
Sep 10 2019
12:44 AM
1 Kudo
The datasheet talk alot about Visibility of Meraki Devices but i dont see anything about configuring or adding new devices via DNA Center
... View more
Kudos given to
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 9299 | Jul 24 2020 12:42 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 13 | 64982 | |
| 4 | 12747 | |
| 3 | 9433 | |
| 3 | 17383 | |
| 3 | 3529 |
© 2025 Cisco Systems, Inc.
