Hi Priesty,   Thanks, just what I needed 🙂   We’d be running them just out on the internet, rather than through an MX, possibly through a new Meraki mobile device, it’s good to know they worked happily on mobile though, thanks 🙂 ... View more

I've found in the next Edge version (only tested Beta), the HLS (what Meraki uses) video issue has been fixed. I'm currently using Chrome in Kiosk Mode but will return to Edge once it's updated in the next version of Windows. I'm finding Chrome to memory hog as usual! ... View more

Thanks for the info there, that's the kind of info I was looking for.   I've pulled data usage off a current camera, running a low bit rate to a video wall, and it suggested around 32GB a month ... View more

Security would be on the same site, but there's currently no network in the location required, so options are run fresh fibre, or set up a mobile data spoke.   But there's also places we might want to monitor where power is an option but network isn't due to location ... View more

Thanks BrechtSchamp, had missed that thread. One thing I should of added is that we'll be viewing the camera 24x7x365 to our local onsite security team via a videowall to match our other site so will be live viewing the camera ... View more

Just an FYI, 3.36 has been pushed through to Stable, I only updated to 3.33 a few weeks ago, this may help solve a lot of issues! ... View more

If you hit F12 in your browser, and select 'console' (Not source), It will show you any errors, Meraki Support used these errors to help with some issues I had. It can give you a clue as to why something is not loading correctly   Packet capture will also show where things are trying to get to, but maybe not getting a reply, showing where the issue is lying ... View more

I’m not sure if you’re upload is fast enough.... 😜   Worth a try, 3.33 made a big difference for us   The same as us, we’ve also got 2 32s and a 12W, all working 99% happily   When you got packet loss, was it just that? Or any associated errors? Have you F12’d to look at the source for any error codes in there? ... View more

Hey, Are the cameras on multiple switches? Got a decent uplink internet link speed? Beta firmware has come out at 3.34 so maybe worth a try? What cameras have you got? Luke ... View more

To me that’s not making them more reliable, that’s hiding an issue   Our cameras are up 24x7 and are 99.9% stable now on the latest firmware  ... View more

Now set to 12 hours maximum if you hadn’t seen 🙂 ... View more

I think you’re probably best ringing into support the next time it happens so they can troubleshoot in the live scenario for you. Without access to the logs and running packet captures, which you could try, not sure where else to go I’m afraid ... View more

It’s worth checking all the firewall rules are correct with what’s up in the top right menu under help and the firewalls, Meraki May have added some more locations that you need to update with, we had similar issue Have you tried updating to FW 3.33, that fixed some reliability issues for us 🙂 ... View more

I can confirm Edge is the issue, we had the same and raised it with Support. Edge has an issue playing HLS content, which came about after the upgrade to 1903 Windows 10, and the new edge browser. This was annoying for us as I want to use the built in Windows 10 kiosk feature along with meraki video wall which means there are no logins, no other actions available apart from automatically logging into a local user and being tied down to a store app, edge in this case tied to the video wall only, brilliant, when edge works again! For note, I’ve tested the new beta edge version and it is working again, just need to wait for the next version of Windows 10 for the new ‘standard’ edge. We’re using chrome for now but it’s such a memory hog! ... View more

Hey, What software version are you running on the cameras? Are your cameras/network behind a firewall? Luke ... View more

Within chrome, you can download a chrome extension that does this for you, quite simple 🙂   I've used this one before https://autorefresh-extension.com     ... View more

I've setup a second layout and set the rotation. It does refresh all the video feeds when it changes, but doesn't refresh the page which is good.   Not sure if it'll help with the cameras that freeze though, will go set it now and see what happens ... View more

The Chrome Kiosk mode is nice, for within Chrome, but the Windows 10 Kiosk mode automatically logs the computer, with a limited local user account, doesn't allow you to break out of Edge, and only allows you to the 1 page, same as the Chrome Kiosk mode, it's really decent for a built in feature.   At the moment, live view isn't working with Edge though 😞   I've updated the cameras to Beta3.33 yesterday but still 2 out of the 10 cameras froze overnight, but did come back without refreshing, not sure how long it took them to come back though ... View more

Hi, I've just this week setup our PC for security to monitor our new cameras (MV72s at the moment). We're half way through our camera installation due to engineers time availability. We currently have 10 cameras up on the video wall and a couple of times since being full screen, and 24x7, 2 cameras have froze a couple of times with a refresh of the page being needed to bring them back. I've looked at the auto-refreshes, but it brings it out of the full screen so has to be clicked back to full screen which will become an annoyance for the security staff so I haven't activated that yet. I'm waiting to get another 7 cameras up (Only 15 or 16 will be on the video wall though) to have it a fully fledged system to then see how it behaves.   I was originally going to use Edge with the Windows 10 built in Kiosk mode which is great a setup for multiple users not having to login, and only allows them on that 1 page only, as everything else is hidden, but there's a live view issue with Edge at the moment, so tried IE, and it was quite flaky and slow, so now trying Chrome, where we get the above issues.   How did you get on with your test systems?   Thanks Luke ... View more