@Bigbub wrote: Hi There, Here's the link to the required ports to open on the Palo Alto. https://documentation.meraki.com/zGeneral_Administration/Other_Topics/Firewall_Rules_for_Cloud_Connectivity BB. its not for every org the same, so best is to check on the dashboard where the mx is added
... View more
no. Meraki APs with an integrated Bluetooth Low Energy radio can emit Beacons with following technical specifications: Beacon interval: 100 ms (best effort) Transmit power: 0 dBm
... View more
here another topic relating to this with some info. https://community.meraki.com/t5/Switching/Management-VLAN/m-p/19025#M1520 you could make a support case and give it a try. what is the reason you want to route to its own vlan?
... View more
just use the gateway .1 when you have new switches or factory reset they dont have any vlan and routing configuration so it would not be able to contact the cloud.
... View more
you have a lot more control now then back in the days. https://documentation.meraki.com/zGeneral_Administration/Firmware_Upgrades/Cisco_Meraki_Firmware_FAQ
... View more
the disabled option on per port vlan configuration does not work? @PhilipDAth wrote: You are correct - you can only disable a LAN port on an MX port via the local status page. You can access the local status page remotely by enabling this functionality. https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_Meraki_Device_Local_Status_Page#Controlling_Remote_Access_to_the_Local_Status_Page
... View more
with a router on a stick you dont need a L3 switch. but performance can be lower depending on kind of router and connection between the router and switch
... View more
you testing from the ap itself or from a client ? make sure your client has a good wifi adapter, not like 1x1 . make sure autonegotiation is 1Gb between ap and switch and also the powerinjector is 1Gb. set minimum bitrate to 12+ . make sure you connect to 5ghz. small cells/lower dbm is better for performance.
... View more
@MelvinV wrote: I have no idea how to do this, any advice is appreciated. I went to the switch/port and clicked event log but cannot see any events for the port connected to the AP. I am really new to this. you click on the switch port the affected ap is connected to. then at the end of the page look for crc errors/collisions.
... View more
@franfm wrote: Thanks guys. OK, with which the only real risk to our endpoint/LAN in case of compromised the access router (ISP) would be a DoS attack on our MX? Are you agree? BR.Fran i would rather care to educate users and secure and patch your endpoints as they are opening the connections to the public network and getting data into your lan.
... View more
