About AlexG

Unni_NOC

Please add an option to trigger VPN alerts based on timing, like the one you have for node down.

David-API · ‎11-12-2020

https://github.com/immolate/MerakiAPI This is my self designed code... And though fairly messy. All the functions work. You may have some answers to help you there. your $request = statement looks.. I can't decipher what it's doing. But maybe mine will help you?

PaulNN · ‎10-01-2020

thank you, this really helped us

Roques · ‎10-03-2019

Hi, Do the stats reset? I did that with one AP and all the information about users disappeared. Will it come back?

IoT · ‎08-22-2019

Hey AlexG - I hope you are doing great! What USB modem are you using ? I am curious about the overall experience with the USB fail over you described. Check out the Skyus SC line - this should remove some of your challenges you have been facing https://www.inseego.com/iot-modems/

tdj7397 · ‎08-12-2019

For anyone wondering - ended up RMA'ing the MX60W for a new MX64W. Once it plugged up to my switch and connected to the cloud everything in the dashboard was green and no more "Bad internet connection" issues. Seems to have been failed hardware or something along those lines.

Snickers · ‎10-09-2018

We had this happen to us yesterday. I had to unplug the primary circuit to fail-over. The primary circuit was up with lots of lost packets and high latency. Having the ability to control internet fail-over would be a nice feature to have.

AlexG · ‎09-14-2018

@PhilipDAth has the right idea, in my opinion. We had to bulk create 250ish networks some months back, and I used a fairly simple PowerShell script to hit the API and update the VLANs after the networks were created. I used a script to create the networks and add them to our templates as well but that's not always necessary. Powerful stuff once you get the hang of it!

AlexG · ‎09-14-2018

'Connecting' is a pretty common thing we see with our MiFi 620 modems. For us, it generally means the signal strength to the carrier is sub-par, or simply not available. We've tried external antennae, but the RF loss is too great and it simply doesn't work. If it's possible to try a different modem with a different carrier, that may be your best bet.

MerakiIT · ‎07-10-2018

thank you everyone. seems the issues with tls thanks community 🙂

AlexG · ‎05-07-2018

Forgot to add the follow-up on this one. Oddly enough, when I switched the link type on the Palo over to broadcast from p2p prior to the MX upgrade, every single route dropped out of the table on the Palo. Once I finished upgrading the MX, the routes were learned again and popped into the active routing table. Could just be a bug within the Palo software, but it was interesting nonetheless.

MartinS · ‎04-25-2018

The Meraki documentation (kindly linked by AlexG) states the following: Note: Call volume is limited to 5 calls per second (per organization) Does anyone know how an API key assoicated with an MSP level user (that being a user that has access to multiple Orgs) is rate limited? Is the rate limiting done at API Key level, or is the rate limiting smarter than that and gives you 5 calls per second per org you're quiering with the shared API Key? ie at: GET https://api.meraki.com/api/v0/organizations/ <org_id>/...

Michael-873494 · ‎04-13-2018

The final issue I had, turned out to have to do with the "scope=All". Adding the scope parameter causes the error I reported, though I am not sure why and tech support doesn't know either.

Cowboyflr · ‎04-05-2018

sorry usa based ....thought they might have checked in usa @PhilipDAthwrote: When you say the three big ones @Cowboyflr - none of them even operate in my country. Globally I suspect they may not even make the top ten list.

Jitender · ‎02-19-2018

Thought to add this so that in case someone look information on this then they can complete data. Take the number before the ,99 from CSQ value and refer to table below Value RSSI dBm Condition 0 <-113 Worst 1 -111 Worst 2 -109 Worst 3 -107 Worst 4 -105 Worst 5 -103 Worst 6 -101 Worst 7 -99 Worst 8 -97 Worst 9 -95 Worst 10 -93 OK 11 -91 OK 12 -89 OK 13 -87 OK 14 -85 OK 15 -83 Good 16 -81 Good 17 -79 Good 18 -77 Good 19 -75 Good 20 -73 Excellent 21 -71 Excellent 22 -69 Excellent 23 -67 Excellent 24 -65 Excellent 25 -63 Excellent 26 -61 Excellent 27 -59 Excellent 28 -57 Excellent 29 -55 Excellent 30 -53 Excellent 31 >-51 Best

PhilipDAth · ‎01-02-2018

I would recommend to changing over to using WPA-2 Enterprise mode, where every user gets their own password. You can link it into Active Directory, so their AD credentials are used. Note there is quite a bit of work and if you have never done it before it might be a bit challenging. https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_with_WPA2-Enterprise If you have a Google Apps account you can also authenticate against that: https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_WPA2-Enterprise_with_Google_Auth Perhaps the easiest option is to enable WPA2-Enteprise mode, and use local Meraki accounts for authentication. https://documentation.meraki.com/MR/Encryption_and_Authentication/Meraki_Cloud_Hosted_Authentication Lastly, if you really want to use a PSK, consider getting Systems Manager. This allows you to use the WiFi settings, including the password, to machines without having to contact everyone. Of course, they do need to be able to connect to the Internet once to get their profile update after you change the password. https://documentation.meraki.com/SM/Profiles_and_Settings/Configuration_Settings#WiFi

jlandky · ‎12-08-2017

#swagplease

AlexG

Community Record

Badges

Re: Alert Managment

Re: Powershell POST Script - Help

Re: Uplink Monitoring - How do you handle it?

Re: Move an AP between networks

Re: 4G LTE Devices

Re: MX WAN 2 internet "Ready" status

Re: SD-WAN Outside of Auto-VPN?

Re: MX VLAN and Addressing Template for 1000 sites

Re: MX / Verizon Aircard

Re: Invoke-WebRequest : The underlying connection was closed: An unexpected...

Re: OSPF Advertising Issues with Palo Alto firewalls

Re: Dashboard API - Too Many Requests

Re: API returning 404

Re: 3g 4g failover usb modem upgrade to support Franklin U772 USB Modem

Re: Cellular interface details for entire dashboard

Re: Meraci WiFi Password Distribution?

Re: What’s “swagplease”?

Re: Invoke-WebRequest : The underlying connection was closed: An unexpected...

Re: Cellular interface details for entire dashboard

Re: Move an AP between networks

Re: Dashboard API - Too Many Requests

Re: Invoke-WebRequest : The underlying connection was closed: An unexpected...

Re: Dashboard API - Too Many Requests

Re: Uplink Monitoring - How do you handle it?

Re: Move an AP between networks

Re: API returning 404