I would probably configure it that way. Depending on the amount of users perhaps one VLAN per floor for some separation and also extra VLANs for Voice, printers etc.
... View more
If there is only one link and no plan to add a second, then I would not aggregate them. It will work, but the second link in the bundle will be constantly listed as failed.
... View more
There will nothing be adjusted automatically. You need to configure the aggregated Interface on the MS corresponding to the Nexus. For example both are trunk, both have the same allowed VLANs.
... View more
You use the ports that connect to the neighbour switch. These are typically two or four of your uplink ports on the MS that connect to your Core/Distribution-Switch (The Nexus 9k)
... View more
Yes, the Firewall rules on the MX are for traffic that is sent through the firewall to the outside or to other VLANs. It doesn't affect traffic to or from the MX.
... View more
Personally, I don’t like the MR advanced licensing model. First, you are forced to move to per device licensing regardless if it a good fit or not. And I prefer to have Umbrella as a separate product as the visibility features and flexibility of the “real” Umbrella is really good.
... View more
Hi all, the subject says it ... I would like to change my LAN2 port on an MX67 to WAN2 to use it as the secondary WAN. But I don't find the corresponding API-call ... Any hints? Hope you have all a great holiday-time, Karsten
... View more
I would do it the following way: Set up the MX parallel to the pfSense Configure AnyConnect VPN and only route the VPN-subnet to the MX Move all VPN-clients to the MX Move the outgoing default-route to the MX Remove the pfSense from the network
... View more
Yes, for the vMX (and Z-series) you are allowed to have a "lower" license than the Org is configured for. This is because the vMX is basically a VPN-concentrator and not a real firewall.
... View more
I had some remote eyes look at two stacks: Stack of 2*MS225: all green Mixed Stack of MS210 and MS225: 2*green, 1*orange ok, that doesn't really help now ...
... View more
That was also my first thought. Last time I touched one of the stacks physically is probably a year ago ... And I didn't look at the stack LEDs ...
... View more
