Using The Same Object Group For Source And Destination On A Rule
Say I have these two objects:
Object1 = 192.168.1.0/24
Object2 = 192.168.2.0/24
Say I have an MX64 with two VLANs:
VLAN1 IP = 192.168.1.1/24
VLAN2 IP = 192.168.2.1/24
Say I don't want these subnets to talk to each other. Could I make an object group including both the above objects and then use that group as the source and destination in a deny firewall rule? It makes sense to me, I just haven't done it before on Meraki.