Meraki

Fruju · ‎Dec 19 2017

Anyone know an ETA for when RADIUS accounting might be available for MX devices? It seems something I would have assumed was already in there, but it isn't 😞

Fruju · ‎Oct 30 2017

Is there a way through the API to get the MAC of a device that shows up nearby? For example, setup an AP that's just listening and obtaining MAC of nearby clients. I can see devices in the location heatmap and live presence, but can't find a way in the API documentation that allows me to find this detail. Thanks in advance

Fruju · ‎Oct 30 2017

Thank you

Fruju · ‎Oct 30 2017

Is there a page somewhere that lists out all the API commands? I want to have a play with connecting via postman. Thanks in advance 🙂

Fruju · ‎Sep 28 2017

Please post in your native language, Ill run it through a google translate or something similar to better understand what the issue is

Fruju · ‎Sep 25 2017

I would need to better understand how the AP's are placed in the network topology to be able to give advice on this. Usually, bad IP assignment is related to VLAN's on the ports where the AP's are plugged in or incorrectly configured DHCP to the AP's, however as they are set with Static IP's, I guess it's not DHCP.

Fruju · ‎Sep 20 2017

Hi, I'm "Fruju". I work out of Brisbane, Australia (mostly), have worked with Meraki products for around 5 years now and have enjoyed watching the product range expand and grow. I mostly deal with site surveys and then implementing the meraki rollout to airports, shopping centres and hotels, offices etc. Flick me a message if you want to chat

Fruju · ‎Sep 20 2017

sweet!

Fruju · ‎Sep 20 2017

Set a VLAN on the external interface of that router that goes into the MX84 then set that port on the MX84 to have the same VLAN. Either that or use ACL's

Fruju · ‎Sep 20 2017

Run around with a laptop and ekahau and map out your area first so you dont have black spots

Fruju · ‎Sep 20 2017

Bugger. Had no idea that had occurred. Which regions got hit?

Fruju · ‎Sep 20 2017

What devices are you using? Is this even Meraki related? All Meraki configurations are stored on the Meraki cloud. It's pretty hard to lose it unless you delete all configurations from your devices.

Fruju · ‎Sep 20 2017

You can whtielist devices that connect to the wireless, which will also remove the splash page for them. That's what I would try first anyway..

Fruju · ‎Sep 20 2017

In the meraki dashboard, if you go to the access point in question under "wireless" and scroll to the bottom of the access point page, you can select to update that single AP's firmware.

Meraki

Community

About Fruju

Fruju

Community Record

Badges

Radius Accounting on MX devices

Get MAC address of nearby client device

Re: List of API commands

List of API commands

Re: MR 52

Re: Bad IP Assingment

Re: Please introduce yourself

Re: New community feature - Quick Reply

Re: How to connect a Cisco router behind an MX84?

Re: MR52 Access piont

Re: why do i bother using your service??!!!!