Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About MijanurRahman
MijanurRahman
Getting noticed
Member since Sep 20, 2017
Feb 26 2018
Community Record
21
Posts
8
Kudos
3
Solutions
Badges
Feb 4 2021
3:30 AM
I had the same issue with a Meraki MX64 today. I deauthorized and reauthorized the user from the dashboard and my problem was solved. I hope this helps.
... View more
Dec 22 2020
4:29 PM
1 Kudo
Hello Everyone! I went to the customer and now it is working, I thank all the comments you gave me, there was nothing involved with the problem we had. the fix procedure we found was: - disable all firewall and antivirus software from the windows computer. - disable/enable the wireless adapter - Connect to the network, try to cast, it works. - enable firewall/antivirus software - the cast still working - we also reboot the computer, and the cast still working. The parameters of the configuration at Meraki are: - Separate SSID yes and dis-similar SSID have worked. - Bridge mode yes - Band Steering enabled - Multicast to Unicast conv disabled - MR45 - Rls 27.5.1 - 802.11ax enable thank you all!!
... View more
Jul 5 2018
10:03 PM
Too easy! It would be good if Meraki could allow MPLS type AutoVPN's to have a longer timeout or set to infinite.
... View more
Apr 2 2018
7:28 AM
Really nice article and great read. Thanks for posting. W
... View more
Feb 26 2018
6:58 AM
If you have a policy server, controlling the hosts file is simple - you can use Group Policy Preferences to copy the hosts file GPMC - Computer Configuration - Preferences - Windows Settings - Files 'Replace' from a network share to %SystemDir%\drivers\etc\hosts The if you need to add/remove websites at some point in the future, you only need edit the hosts file on the network share and it will be copied over the hosts file on each client.
... View more
Nov 8 2017
2:52 AM
I had to remove the power cable, after an minute replugging. And the switch was starting and working well.
... View more
Oct 4 2017
5:35 AM
1 Kudo
I have been using this method but was not completely convinced it was working. I tried another test and it seems to work from what I can tell. The only problem is it is an inconvenient way to enter many entries.
... View more
Oct 2 2017
7:09 AM
1 Kudo
@Senan_Rogers 3rd-party VPN routes are not advertised into the AutoVPN route table and there is no way to do so unfortunately. A common workaround when you need to merge both AutoVPN and 3rd-party VPN route tables is to use two different MX appliances as hubs: 1. DC MX1, that's in your main org and terminates your Meraki AutoVPN domain.
2. DC MX2, which is in a dedicated org you create just for terminating 3rd-party VPN.
Then on DC MX1, simply configure a static route for any of the remote, 3rd-pary VPN destinations with a next hop of the inside IP of MX2. The same can be done in reverse on MX2, with a default route pointing towards your MX1 or your DC core.
... View more
@Ricardo_Bagnoli The easy way around manually setting group policies is to let a RADIUS server do it for you based on group membership (Active Directory usually). This way the Meraki group policies are auto assigned which then allows you to do the VLAN grouping as you desire along with any other restrictions you want placed on the devices.
... View more
Sep 29 2017
9:18 AM
1 Kudo
No, MX doesn't provides report like this. MS switches gives you visibility like that. However, if you notice the 'Network-wide > Clients' page, you might find few relevant information. Usually I make my mind before I connect any switch on MX and add a 'note' on it. It helps me on troubleshooting.
... View more
Sep 29 2017
7:51 AM
Thanks everyone for their responses. I will give the Minimum BitRate a shot as soon as I get a maintenance window from the client. ~Doug
... View more
Sep 29 2017
12:49 AM
Hi, you should modify it from 'Splash Behavior' under 'Wireless > Splash Page'. Is it a RADIUS server you are redirecting to? Then the RADIUS server should define this URL, please check in their documentations.
... View more
Sep 26 2017
9:20 AM
So you are looking for client-to-site/remote access VPN connection using MX. No you can't do it, it supports site-to-site VPN only. You don't need UserID or Username for a site-to-site VPN scenario. Preshared key with encryption methods in phases should suffice. You can ask your VPN provider to provide required site-to-site VPN parameters, if they allow. I dont see any standard firewall also supports it. Only option left is using DD-WRT, Tomatoe firmware, etc. Cisco ISR can be used as well.
... View more
Sep 26 2017
8:06 AM
3 Kudos
Yes, it will work. I have a customer who is using TP-Link PoE Injector since year without any problem encountered.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 7007 | Oct 3 2017 5:55 AM | |
| 2067 | Sep 29 2017 9:18 AM | |
| 2194 | Sep 26 2017 8:06 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 3 | 2194 | |
| 1 | 7007 | |
| 1 | 6388 | |
| 1 | 5434 | |
| 1 | 2067 |
© 2024 Cisco Systems, Inc.
